Quik Tip Consumables

A quick twist is all it takes to install Quik Tip contact tips!

Bernard Quik Tip™ consumables are designed with a threaded taper lock between the contact tip and the gas diffuser that increases tip life by providing excellent heat transfer and electrical conductivity.

Not currently using a Bernard® MIG gun? Our Quik Tip conversion series consumables allows you to convert your Lincoln®, Miller®, and Tweco® MIG gun consumables so you can still enjoy the benefits of Quik Tip consumables.

more...

  • Gas diffusers have positive stops to secure Quik Tip contact tips in a fixed position for superior repeatability and consistent quality welds – multiple fixed positions available
  • Nozzles are available in threaded and slip-on styles

Looking for heavy-duty consumables?

The Quik Tip HD series is designed specifically for shipbuilding, trailer fabrication or any heavy equipment manufacturing operation.

Quik Tip HD consumables family showing contact tip, diffuser, nozzle cone and nozzle body
  • Features a removable nozzle cone that lowers downtime and consumable costs by allowing operators to replace only the cone, the most frequently damaged part of the nozzle, without removing and replacing the entire nozzle and contact tip
  • Contains an increased wall thickness and insulating material to reduce the number of changeovers caused by heat degradation
  • Available with Quik Tip series 1 contact tips

System Components

Quik Tip Consumables

  • Quik Tip contact tips
  • Quik Tip gas diffusers
  • Quik Tip nozzles
  • Neck insulators
    • 4323R (small profile / slimline insulator)
    • 4423R (large insulator)

Quik Tip HD Series Consumables

  • Quik Tip contact tips
  • Quik Tip gas diffusers
  • Quik Tip nozzle cones
  • Quik Tip nozzle bodies
  • Neck insulators
    • 4423R (large insulator)

Product Compatibility

Quik Tip consumables are compatible with the following MIG welding guns:

Quik Tip Contact Tips; Copper

T1023Series 1 for 0.023″ (0.6 mm) wire
T1030Series 1 for 0.030″ (0.8 mm) wire
T1035Series 1 for 0.035″ (0.9 mm) wire
T1039Series 1 for 0.039″ (1.0 mm) wire
T1045Series 1 for 0.045″ (1.2 mm) wire
T1364Series 1 for 3/64″ (1.2 mm) wire
T1052Series 1 for 0.052″ (1.3 mm) wire
T1116Series 1 for 1/16″ (1.6 mm) wire
T1068Series 1 for 0.068″ (1.7 mm) wire
T1072Series 1 for 0.072″ (1.8 mm) wire
T1564Series 1 for 5/64″ (2.0 mm) wire
T1332Series 1 for 3/32″ (2.4 mm) wire
T1764Series 1 for 7/64″ (2.8 mm) wire
T1118Series 1 for 1/8″ (3.2 mm) wire

Quik Tip Tapered Contact Tips; Copper

T2023Series 2 for 0.023″ (0.6 mm) wire; tapered
T2030Series 2 for 0.030″ (0.8 mm) wire; tapered
T2035Series 2 for 0.035″ (0.9 mm) wire; tapered
T2045Series 2 for 0.045″ (1.2 mm) wire; tapered
T2364Series 2 for 3/64″ (1.2 mm) wire; tapered
T2052Series 2 for 0.052″ (1.4 mm) wire; tapered
T2116Series 2 for 1/16″ (1.6 mm) wire; tapered

Quik Tip Gas Diffusers

D114Q1/4″ recess; threaded
D118Q1/8″ recess; threaded
D1FQFlush; threaded
D1141/4″ recess; slip-on
D1181/8″ recess; slip-on
D1FFlush; slip-on
D2181/8″ recess; slimline
DS-QTsmall profile diffuser
1070101*water-cooled diffuser
*For use with Bernard® W-Gun™ semi-automatic water-cooled MIG guns

Quik Tip Nozzles

N1C34HQ3/4″ bore, heavy duty, plated copper; threaded
N1C58HQ5/8″ bore, heavy duty, plated copper; threaded
N1C34Q3/4″ bore, plated copper; threaded
N1B34Q3/4″ bore, brass; threaded
N1C58Q5/8″ bore, plated copper; threaded
N1B58Q5/8″ bore, brass; threaded
N1C12Q1/2″ bore, plated copper; threaded
N2C12HQ1/2″ bore, plated copper; threaded; tapered
N2C38HQ3/8″ bore, plated copper; threaded; tapered
N1C34HD3/4″ bore, heavy duty, plated copper; slip-on
N1C58HD5/8″ bore, heavy duty, plated copper; slip-on
N1C343/4″ bore, copper; slip-on
N1C585/8″ bore, copper; slip-on
N1C121/2″ bore, copper; slip-on
N2C121/2″ bore, copper; slimline
N2C383/8″ bore, copper; slimline
NSQT-12001/2″ bore, flush, copper
NSQT-12181/2″ bore, 1/8″ recess, copper
5627*3/4″ bore, 1/8″ recess, copper (includes 5624 insulator and 5621 clamp)
*For use with Bernard® W-Gun™ semi-automatic water-cooled MIG guns

Compatible Liners


Bernard Conventional Liners

Liner Color:
L1A-15Yellowfor 0.023″-0.030″ (0.6-0.8 mm) wire, 15 ft (4.57 m)
L1A-25Yellowfor 0.023″-0.030″ (0.6-0.8 mm) wire, 25 ft (7.62 m)
L2A-15Greenfor 0.030″-0.035″ (0.8-0.9 mm) wire, 15 ft (4.57 m)
L2A-25Greenfor 0.030″-0.035″ (0.8-0.9 mm) wire, 25 ft (7.62 m)
L3A-15*Whitefor 0.035″-0.045″ (0.9-1.2 mm) wire, 15 ft (4.57 m)
L3A-25*Whitefor 0.035″-0.045″ (0.9-1.2 mm) wire, 25 ft (7.62 m)
L4A-15**Redfor 0.045″-1/16″ (1.2-1.6 mm) wire, 15 ft (4.57 m)
L4A-25**Redfor 0.045″-1/16″ (1.2-1.6 mm) wire, 25 ft (7.62 m)
L6A-15Bluefor 5/64″ (2.0 mm) wire, 15 ft (4.57 m)
L6A-25Bluefor 5/64″ (2.0 mm) wire, 25 ft (7.62 m)
L7A-15Greyfor 3/32″ (2.4 mm) wire, 15 ft (4.57 m)
L7A-25Greyfor 3/32″ (2.4 mm) wire, 25 ft (7.62 m)
L8A-15Blackfor 7/64″-1/8″ (2.8-3.2 mm) wire, 15 ft (4.57 m)
L8A-25Blackfor 7/64″-1/8″ (2.8-3.2 mm) wire, 25 ft (7.62 m)
*Standard liner for guns using 0.035″ and 0.045″ wire
**Standard liner for guns using 1/16″ wire

QUICK LOAD® Liners

415-23-15Qfor 0.023″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-23-15
415-30-6Qfor 0.030″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-30-6
415-30-15Qfor 0.030″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-30-15
415-35-6Qfor 0.035″ – 0.045″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-35-6
415-35-10Qfor 0.035″ – 0.045″ wire, 10′ length; high carbon steel – round wound; replaces conventional liner 415-35-10
415-35-15Qfor 0.035″ – 0.045″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-35-15
415-35-25Qfor 0.035″ – 0.045″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-35-25
415-116-6Qfor 0.045″ – 1/16″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-116-6
415-116-10Qfor 0.045″ – 1/16″ wire, 10′ length; high carbon steel – round wound; replaces conventional liner 415-116-10
415-116-15Qfor 0.045″ – 1/16″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-116-15
415-116-25Qfor 0.045″ – 1/16″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-116-25
415-564-6Qfor 1/16″ – 5/64″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-564-6
415-564-15Qfor 1/16″ – 5/64″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-564-15
415-564-25Qfor 1/16″ – 5/64″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-564-25
415-332-6Qfor 0.078″ – 3/32″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-332-6
415-332-15Qfor 0.078″ – 3/32″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-332-15
415-332-25Qfor 0.078″ – 3/32″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-332-25

QUICK LOAD Liner Retainers

Required for initial QUICK LOAD liner installation only (sold separately)

415-24*for 0.078″ – 3/32″ wire
415-26*for 0.030″ – 5/64″ wire
415-37**for 0.030″ – 5/64″ wire
*Compatible with Tregaskiss® robotic and automatic MIG guns and Bernard® BTB and TGX® semi-automatic air-cooled MIG guns
**Compatible with most Tweco® MIG guns


Liners for Aluminum Wire

415-45-02Polymer liner for 0.035″ – 3/64″ aluminum wire, 10′ length
415-45-03Polymer liner for 0.035″ – 3/64″ aluminum wire, 15′ length
415-35-2Steel wrapped nylon liner for 0.035″ – 0.045″ aluminum wire, 15′ length
415-45-04Polymer liner for 0.035″ – 3/32″ aluminum wire, 25′ length
415-116-2Steel wrapped nylon liner for 0.045″ – 1/16″ aluminum wire, 15′ length
415-116-22Polymer liner for 3/64″ – 1/16″ aluminum wire, 10′ length
415-116-23Polymer liner for 3/64″ – 1/16″ aluminum wire, 15′ length
415-116-26Polymer liner for 3/64″ – 1/16″ aluminum wire, 25′ length

Jump Liners

Not recommended for use with QUICK LOAD liners

QJL-2330Jump Liner for 0.023″ (0.6 mm) – 0.030″ (0.8 mm) wire; 14″ length
QJL-2330-XLJump Liner for 0.023″ (0.6 mm) – 0.030″ (0.8 mm) wire; 27″ length
QJL-3545Jump Liner for 0.035″ (0.9 mm) – 0.045″ (1.2 mm) wire; 14″ length
QJL-3545-XLJump Liner for 0.035″ (0.9 mm) – 0.045″ (1.2 mm) wire; 27″ length
QJL-116Jump Liner for 1/16″ (1.6 mm) wire; 14″ length
QJL-116-XLJump Liner for 1/16″ (1.6 mm) wire; 27″ length
QJLH-116Heavy Duty (HD) Jump Liner for 1/16″ (1/6 mm) wire; 14″ length
QJLN-364Nylon Jump Liner for 0.035″ (0.9 mm) – 3/64″ (1.2 mm) aluminum wire; 14″ length
QJLN-116Nylon Jump Liner for 1/16″ (1.6 mm) aluminum wire; 14″ length

Quik Tip HD Series Consumables

Quik Tip Contact Tips; Copper

T1023Series 1 for 0.023″ (0.6 mm) wire
T1030Series 1 for 0.030″ (0.8 mm) wire
T1035Series 1 for 0.035″ (0.9 mm) wire
T1039Series 1 for 0.039″ (1.0 mm) wire
T1045Series 1 for 0.045″ (1.2 mm) wire
T1364Series 1 for 3/64″ (1.2 mm) wire
T1052Series 1 for 0.052″ (1.3 mm) wire
T1116Series 1 for 1/16″ (1.6 mm) wire
T1068Series 1 for 0.068″ (1.7 mm) wire
T1072Series 1 for 0.072″ (1.8 mm) wire
T1564Series 1 for 5/64″ (2.0 mm) wire
T1332Series 1 for 3/32″ (2.4 mm) wire
T1764Series 1 for 7/64″ (2.8 mm) wire
T1118Series 1 for 1/8″ (3.2 mm) wire

Quik Tip Tapered Contact Tips; Copper

T2023Series 2 for 0.023″ (0.6 mm) wire; tapered
T2030Series 2 for 0.030″ (0.8 mm) wire; tapered
T2035Series 2 for 0.035″ (0.9 mm) wire; tapered
T2045Series 2 for 0.045″ (1.2 mm) wire; tapered
T2364Series 2 for 3/64″ (1.2 mm) wire; tapered
T2052Series 2 for 0.052″ (1.4 mm) wire; tapered
T2116Series 2 for 1/16″ (1.6 mm) wire; tapered

Quik Tip Gas Diffusers

D114Q1/4″ recess; threaded
D118Q1/8″ recess; threaded

Quik Tip Nozzle Bodies

N-HDQHD nozzle body

Quik Tip Nozzle Cones

34183/4″ bore; 1/4″ recess with D114Q diffuser, 1/8″ recess with D118Q diffuser
58185/8″ bore; 1/4″ recess with D114Q diffuser, 1/8″ recess with D118Q diffuser

Neck Insulators

4423RInsulator

Documentation

How-Tos

Videos

Related Products

Product Updates

Related Articles

Additional Resources