Products
Documentation
Articles

Bernard Jump Liners

Bernard Jump Liners Cost-effective and gets you back on the job within minutes! Bernard® jump liners replace only the most commonly worn and clogged liner area to reduce the amount of time a gun is offline and minimize inventory. These jump liners allow for quick and easy neck change-out so the gun can be easily […]

read more...

Auto Head MIG Guns

Auto Head Fixed Automatic Air-Cooled MIG Guns Tregaskiss® auto heads are designed for direct connection to a wire feeder in automatic applications, and incorporate the same robust features as Tregaskiss fixed automatic MIG guns. Tregaskiss auto heads are available in air-cooled models and models enhanced with TOUGH GUN I.C.E.® technology.

read more...

Bernard Conventional Liners

Bernard Conventional Liners Simplify and Reduce Your Inventory These Bernard® conventional liners allow you to simplify and reduce your inventory, and are made of high carbon music wire for smooth wire feed and long life.

read more...

AccuLock S Liners

AccuLock S Liners Load and Lock for better productivity Load and Lock to reduce troubleshooting, downtime and rework Load and Lock for better productivity Bernard® AccuLock™ S liners are a critical component of the new AccuLock S consumables system. This new consumable system was designed to address liner trim length errors, gaps along the wire-feed […]

read more...

Conventional Liners

Conventional Liners Conventional liners for MIG welding guns are made of high carbon music wire for smooth wire feed and long life. Available for mild steel, aluminum, stainless steel and flux-cored wire in lengths of up to 25 feet (7.6 m) for all wire sizes, these rear-loading liners thread in with no need for set […]

read more...

TGX MIG Guns

TGX MIG Guns Bernard® TGX® semi-automatic air-cooled MIG guns are perfect for low volume, light- to medium-duty welding and a durable, attractively priced choice. TGX MIG guns are ideally suited for lower amperage welding applications and shorter arc-on times.

read more...

AccuLock R Consumables

AccuLock R Consumables Load and Lock to Reduce Unplanned Downtime The longer lifespan of AccuLock™ contact tips means fewer human interactions within your welding cells and fewer accidental errors as a result. With contact tip cross-threading issues also virtually eliminated, you’ll spend less time troubleshooting and more time on proactive weld quality and productivity initiatives.

read more...

AccuLock S Consumables

AccuLock S Consumables Bernard® AccuLock™ S consumables are designed to address liner trim length errors and erratic wire feeding. Both are common costly contributors to troubleshooting, rework and production downtime.

read more...

Nozzle Detect

Nozzle Detect Nozzle Detection for the TOUGH GUN® TT3 and TT3E reamer uses a proximity sensor mounted on the side of the reamer that can be used independently of the ream cycle. The robot positions the front end of the MIG gun close to the sensor to detect the presence of the nozzle. If the […]

read more...

MW1 MIG Guns

MW1 Fixed Automatic Water-Cooled MIG Guns NEW! Now Available With AccuLock™ R Consumables Tregaskiss® MW1 fixed automatic water-cooled MIG guns are engineered for hard tooling automation applications requiring a simple, durable and repeatable MIG gun that maximizes uptime and throughput.

read more...

MA1 MIG Guns

MA1 Fixed Automatic Air-Cooled MIG Guns NEW! Now Available With AccuLock™ R Consumables Tregaskiss® MA1 fixed automatic air-cooled MIG guns are engineered for hard tooling automation applications requiring a simple, durable and repeatable MIG gun.

read more...

AW2 MIG Guns

AW2 Fixed Automatic Water-Cooled MIG Guns NEW! Now Available with AccuLock™ R Consumables Tregaskiss® AW2 fixed automatic water-cooled MIG guns are designed for dependable performance in high amperage, high temperature hard tooling welding applications.

read more...

Reamer Stand

TOUGH GUN Reamer Stand Custom height. Quick installation. Easy on the budget. Tregaskiss provides a simple fixed height durable stand for all TOUGH GUN® TT3 and TOUGH GUN TT3E reamer models. Each TOUGH GUN reamer stand can be ordered to a custom height between 18- and 45-inches.

read more...

Filter / Regulator

Filter/Regulator The filter/regulator unit from Tregaskiss is another recommended accessory that helps extend the life of your TOUGH GUN® TT3 (analog) or TT3E (Ethernet) reamer.

read more...

Lubricator

Dedicated Motor Lubricator This dedicated motor lubricator maximizes performance and protects your TOUGH GUN® reamer investment by extending the life of the motor, and is highly recommended for use in damp and moisture rich environments.

read more...

S-Gun 250 amp MIG Guns

S-Gun 250 amp Semi-Automatic Air-Cooled MIG Guns Designed to meet the needs of the shipbuilding and construction industries, the Bernard® S-Gun™ 250 amp semi-automatic air-cooled gun model offers a locked rotatable neck that cannot be easily removed by the welding operator, but is still readily serviceable by maintenance. The result is less time spent by […]

read more...

Spray Containment

Spray Containment A perfect addition to the TOUGH GUN® TT3 Reamer The innovative spray containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin. The collected anti-spatter is then channeled away from the spray containment unit to a convenient point of disposal, which can be shared among several spray […]

read more...

TOUGH GUN TT3E Reamer

TOUGH GUN TT3E Reamer New Ethernet Communications Capability The new TOUGH GUN® TT3E reamer robotic nozzle cleaning station from Tregaskiss continues to offer the same high levels of durability, serviceability and repeatability, and is now further enhanced by digital Ethernet communications that better integrate this unit into the digital controls infrastructure of your facility. Access […]

read more...

TOUGH GUN TA3 MIG Guns

TOUGH GUN TA3 Robotic Air-Cooled MIG Guns Maximize Throughput. Minimize Costs. Designed with our unique and durable low-stress robotic (LSR) unicable, TOUGH GUN® TA3 robotic air-cooled MIG guns feed through the robot arm and provide outstanding precision and reliability. The TOUGH GUN TA3 MIG gun combines the most valuable product options from our legacy TOUGH […]

read more...

TOUGH GUN CA3 MIG Guns

TOUGH GUN CA3 MIG Guns Maximize Throughput. Minimize Costs. Designed for high-volume production environments, TOUGH GUN® CA3 robotic air-cooled MIG guns are engineered for precision, durability, accuracy, repeatability, minimal downtime and fast and easy maintenance.

read more...

BTB MIG Guns

BTB Semi-Automatic Air-Cooled MIG Guns Optimize for Productivity. Standardize for Simplicity. Build your ultimate MIG gun. Choose from a variety of necks, handles and trigger styles to optimize welder ergonomics and weld access ‒ plus, standardize with a single line of consumables to simplify maintenance and contain costs.

read more...

Cutter Blades

TOUGH GUN Cutter Blades Reliable and Durable. Competitive pricing. TOUGH GUN® cutter blades are designed for use with the TOUGH GUN TT3 or TT3E reamer and are engineered from harder, stronger material, making them more resistant to breaking, chipping or cracking. Designed with stronger edges to allow for improved cutting and cleaning performance, these cutter […]

read more...

Spool Gun & Push-Pull Gun Conversion Kits

Spool Gun and Push Pull Gun Conversion Kits These conversion kits of innovative Bernard front-end parts offer improved performance and productivity when used on other brands of spool and push-pull guns including those from Miller®, Profax® and Fronius®. Try Bernard® Centerfire™ consumables and our wide variety of interchangeable necks for greater flexibility. 

read more...