PRODUCT IMPROVEMENT –

Nozzle Detection Option for TOUGH GUN™ TT3 and TT3E Reamer Robotic Nozzle Cleaning Stations

April 28, 2017

An improvement has been made to the Nozzle Detection option for our TOUGH GUN TT3 Reamer. This same option is also now available on our TOUGH GUN TT3E Reamer. New Nozzle Detection

This new Nozzle Detection uses a proximity sensor mounted on the side of the reamer that can be used independently of the ream cycle and is compatible with any nozzle size. The robot positions the front end of the MIG gun close to the sensor to detect the presence of the nozzle. If the nozzle is present, a signal is then sent back to the robot controller or PLC.

Affected Part Numbers

  • TT-2333 + TT-2334 – OLD Nozzle Detection for TOUGH GUN TT3 Reamer (analog model); available only for 1.062" nozzle O.D.
  • TT3E-2344 – NEW Nozzle Detection for TOUGH GUN TT3 and TT3E Reamer; available for all nozzle O.D. sizes
  • RS-500-5 – 4m cable with 3 poles (M12 connector); required for analog model only and only when selecting Nozzle Detection option
  • TT3E-2343 – Splitter; required for Ethernet model only and only when selecting both the Nozzle Detection and the Wire Cutter options together


To learn more about our TOUGH GUN TT3 Reamer offering, visit Tregaskiss.com/ReamerTT3 or Tregaskiss.com/ReamerTT3E.