Built tough, TOUGH GUN® clamps and mounting arms from Tregaskiss are machined from solid extruded aluminum alloy so they won’t bend or break. Engineered to fit the TOUGH GUN CA3 robotic air-cooled MIG gun, these clamps and mounting arms provide a wide bearing surface for optimum purchase and strength. OverviewPart Numbers The clutch mount clamp [...]
Compatible with TOUGH GUN® CA3 and legacy TOUGH GUN G1 series robotic air-cooled MIG guns, the original TOUGH GUN safety clutch is engineered for demanding production environments and is designed to e-stop your robot with a deflection of only 1 degree. OverviewPart Numbers Easily installed in less than 10 minutes using a single Allen wrenchLEDs [...]
The TOUGH GUN® solid arm mount (SAM) is used with robot collision software as an alternative to the legacy TOUGH GUN clutch. Tool center point (TCP) is not affected when substituting a solid arm mount for a TOUGH GUN clutch. OverviewCompatibilityPart Numbers This TOUGH GUN® solid arm mount is made from high strength aluminum alloyInterfaces [...]
The TOUGH GUN® neck checking fixture tests the tolerance of the neck on your robotic MIG gun to tool center point (TCP). Should the neck be out of tolerance due to impact or prolonged usage, this fixture can be used to realign the neck rather the having to replace it. OverviewCompatibilityPart Numbers Prolongs the life [...]
A recommended accessory for the TOUGH GUN® TT4A and TT4E reamer, nozzle detect alerts maintenance personnel when the nozzle on the robotic MIG gun is no longer present, before a weld is attempted. This reduces rework and scrap costs caused by welding without a nozzle. This detection system uses a proximity sensor, which is mounted [...]
The TOUGH GUN® wire cutter from Tregaskiss removes the ball at the end of the welding wire to provide smooth arc starts and consistent wire stick-out (ideal for Touch Sensing) This system cuts a variety of wire types, including stainless steel, aluminum and flux-core, in sizes up to 1/16″ (1.6 mm). OverviewSpecsPart Number Unique carbide [...]
The Bernard® S-Gun™ 250 amp MIG gun is designed to meet the needs of the shipbuilding and construction industries. This semi-automatic air-cooled MIG gun offers a locked rotatable neck that cannot be easily removed by the welding operator, but is still readily serviceable by maintenance personnel. This means that welders will spend less time looking [...]
Save time and money by loading your liners from the front! Innovative QUICK LOAD® liners install from the front of the MIG gun in less than half the time required to install conventional liners, increasing uptime, cost savings and safety. OverviewCompatibilityPart Numbers Requires less than half the time and effort to replace (compared to conventional [...]
TOUGH GARD® anti-spatter liquid is a ready-to-use water-soluble, non-toxic product developed to address the performance and environmental concerns of metal fabricators. Unlike oil-based anti-spatter solutions, TOUGH GARD anti-spatter liquid won’t clog the sprayer. By prolonging the life of your consumables and reducing the need for downtime, TOUGH GARD anti-spatter liquid can help to reduce your [...]
A perfect addition to the TOUGH GUN® TT4A and TT4E Reamers The innovative spray containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin. The collected anti-spatter is then channeled away from the spray containment unit to a convenient point of disposal. Now standard! Can also be used on [...]
TOUGH GUN® insulating discs are a sacrificial part that is designed to absorb the impact in the event of a robotic collision. These insulating discs help protect your robotic investment and are a recommended component for all TOUGH GUN robotic MIG gun installations. OverviewPart Numbers These TOUGH GUN insulating discs help to protect your robotic [...]
Reliable and Durable. Competitive pricing. TOUGH GUN® cutter blades are designed for use with the TOUGH GUN TT4A or TT4E reamer and are engineered from harder, stronger material, making them more resistant to breaking, chipping or cracking. Designed with stronger edges to allow for improved cutting and cleaning performance, these cutter blades are a perfect [...]
The QUICK LOAD® liner AutoLength™ system is designed specifically to minimize downtime, wire feeding and quality issues commonly associated with the liner being cut to an incorrect length. Short liners are a common root cause of poor wire feeding. Further, a short liner does not have a chance of properly seating in the retaining head — [...]
Worried about hard to reach welds? TOUGH ACCESS® consumables are a sleek line of consumables (including retaining heads and nozzles) that allow entry into those hard-to-reach places that would otherwise be inaccessible due to fixture design or weldment. Available in straight bore (5/8″) and bottleneck (1/2″) style nozzles, these unique consumables are compatible with TOUGH LOCK® [...]
Bernard continues to expand and improve its portfolio of MIG welding guns and consumables, but one of the first products Bernard ever introduced was the 40B Shortstub™ stick electrode holder ― and it’s still satisfying customers today! OverviewSpecsPart Numbers Electrode can be used to within one inch of the high heat, high impact head compared [...]
Bernard W-Gun semi-automatic water-cooled MIG guns increase versatility and productivity, improve weld quality Bernard® W-Gun™ semi-automatic water-cooled MIG guns contain a flexible cable assembly with reinforced synthetic rubber hoses to prevent water leakage, provide increased water flow and reduce gas leakage. Heavy duty necks are available in multiple lengths and bend configurations to allow for [...]
Lower your operating costs, minimize downtime and increase safety by introducing a TOUGH GARD® anti-spatter multi-feed system to your facility. The TOUGH GARD anti-spatter multi-feed system provides a continuous supply of anti-spatter liquid to up to 10 TOUGH GUN® reamer robotic nozzle cleaning stations from a single 5-gallon pail or 55-gallon drum of TOUGH GARD [...]
Cost-effective and gets you back on the job within minutes! Bernard® jump liners replace only the most commonly worn and clogged liner area to reduce the amount of time a gun is offline and minimize inventory. These jump liners connect standard MIG gun liners at the base of the neck and run through the most [...]
Bernard developed the Centerfire™ consumables system with the user’s cost considerations in mind. These contact tips, nozzles and diffusers are easy to use and high performing – providing better arc starts, less spatter and more consistent welds. Plus, they also last up to three times longer than competitive brands. Not currently using a Bernard® MIG [...]
This dedicated motor lubricator maximizes performance and protects your TOUGH GUN® reamer investment by extending the life of the motor. This lubricator is now a standard component on all TOUGH GUN TT4A and TT4E Reamers. It is also highly effective for use in damp and moisture rich environments. OverviewPart Numbers Factory set for optimal pneumatic [...]
The Tregaskiss® 600 amp robotic water-cooled MIG gun is ready to take on your most demanding welding applications. Its rugged design is tough and dependable enough to maximize productivity when welding thick plate or running prolonged duty cycles. In addition to having a water-cooled power cable, the neck features four cooling channels that provide significant [...]
Conventional liners for semi-automatic and robotic MIG welding guns are made of high carbon music wire for smooth wire feed and long life. Available for mild steel, aluminum, stainless steel and flux-cored wire in lengths of up to 25 feet (7.6 m) for all wire sizes, these rear-loading conventional liners thread in with no need [...]
TOUGH GUN I.C.E.® technology from Tregaskiss boosts the duty cycle of our already highly robust robotic and automatic air-cooled TOUGH GUN® MIG guns by providing water-cooled benefits through our I.C.E. (Integrated Cooling Enhancer) component. This component circulates water at the nozzle, keeping front-end consumables running cooler and lasting longer. TOUGH GUN I.C.E. technology is compatible [...]
Custom height. Quick installation. Easy on the budget. Tregaskiss provides a durable but simple fixed height stand for all TOUGH GUN® TT4A and TT4E reamer robotic nozzle cleaning stations. TOUGH GUN reamer stands are available in heights between 18 and 36 inches in 6-inch increments. OverviewSpecsPart Numbers Competitively priced due to simplified design Facilitates quick and accurate reamer change-outs [...]