AccuLock R Consumables

Less downtime. Less troubleshooting. 7,150 gray hairs avoided (roughly).

As you work to meet cost and productivity expectations, you want to choose consumables that are easy for your operators to use so you can spend more time focusing on achieving your throughput, cost reduction and weld quality goals.

Tregaskiss® AccuLock™ R consumables virtually eliminate cross-threading, increase uptime, and reduce troubleshooting in robotic welding applications. The longer lifespan of AccuLock™ contact tips means fewer human interactions within your welding cells and fewer accidental errors.

When users upgrade from a copper tip to AccuLock HDP contact tips they can increase contact tip life up to 10x longer depending on the pulse welding application. In most cases, your current tip and diffuser can be replaced with no impact to Tool Center Point (TCP).

more...

Maximize Performance

  • AccuLock contact tips last longer due to increased mass and 60% of the contact tip buried within the diffuser, away from the heat of the weld
  • When upgrading from a copper tip to AccuLock HDP contact tip can last 10x longer depending on the pulse welding application.
  • Mating tapers on both tip-to-diffuser and diffuser-to-neck connections provide good electrical conductivity
  • No change to TCP – easily upgrade from TOUGH LOCK® and other consumables without the need to reprogram
  • For use with front-loading QUICK LOAD® liners

Minimize Errors

  • Coarse thread on tip virtually eliminates risk of cross-threading during replacement
  • Long contact tip tail concentrically aligns the tip within the diffuser prior to thread engagement, ensuring quick, accurate replacement without cross-threading

Simplify Maintenance

  • QUICK LOAD® liners install from the front of the MIG gun 50% faster than rear-loading liners
    • No need to remove the gun from the feeder
    • Operators can change liners from a safe zone in robot cell
  • Direct replacement for TOUGH LOCK® contact tips and retaining heads with no impact on TCP
  • Simplify MIG welding inventory with a common contact tip. Tregaskiss AccuLock R and Bernard® AccuLock S consumables share a common contact tip

NOTE: There is no impact to Tool Center Point (TCP) when upgrading to AccuLock R consumables from TOUGH LOCK or many other consumables.

AccuLock Contact Tips; Copper

Part NumberDescription
T-A030CH0.030″ (0.8 mm); qty. 10
T-A030CH-1000.030″ (0.8 mm); qty. 100
T-A030CH-10000.030″ (0.8 mm); qty. 1000
T-A035CH0.035″ (0.9 mm); qty. 10
T-A035CH-1000.035″ (0.9 mm); qty. 100
T-A035CH-10000.035″ (0.9 mm); qty. 1000
T-A039CH0.039″ (1.0 mm); qty. 10
T-A039CH-1000.039″ (1.0 mm); qty. 100
T-A039CH-10000.039″ (1.0 mm); qty. 1000
T-A045CH0.045″ (1.2 mm); qty. 10
T-A045CH-1000.045″ (1.2 mm); qty. 100
T-A045CH-10000.045″ (1.2 mm); qty. 1000
T-A052CH0.052″ (1.3 mm); qty. 10
T-A052CH-1000.052″ (1.3 mm); qty. 100
T-A052CH-10000.052″ (1.3 mm); qty. 1000
T-A062CH1/16″ (1.6 mm); qty. 10
T-A062CH-1001/16″ (1.6 mm); qty. 100
T-A072CH0.070″ (1.8 mm); qty. 10
T-A072CH-1000.070″ (1.8 mm); qty. 100
T-A078CH5/64″ (2.0 mm); qty. 10
T-A078CH-1005/64″ (2.0 mm); qty. 100
T-A094CH3/32″ (2.4 mm); qty. 10
T-A094CH-1003/32″ (2.4 mm); qty. 100

AccuLock Contact Tips; HDP (6-10x Longer Life)

Part NumberDescription
T-A035WH0.035″ (0.9 mm); qty. 10
T-A035WH-1000.035″ (0.9 mm); qty. 100
T-A039WH0.039″ (1.0 mm); qty. 10
T-A039WH-1000.039″ (1.0 mm); qty. 100
T-A045WH0.045″ (1.2 mm); qty. 10
T-A045WH-1000.045″ (1.2 mm); qty. 100
T-A052WH0.052″ (1.3 mm); qty. 10
T-A052WH-1000.052″ (1.3 mm); qty. 100

AccuLock Contact Tips; Chrome Zirconium

Part NumberDescription
T-A030ZH0.030″ (0.8mm); qty. 10
T-A030ZH-1000.030″ (0.8mm); qty. 100
T-A035ZH0.035″ (0.9 mm); qty. 10
T-A035ZH-1000.035″ (0.9 mm); qty. 100
T-A039ZH0.039″ (1.0 mm); qty. 10
T-A039ZH-1000.039″ (1.0 mm); qty. 100
T-A045ZH0.045″ (1.2 mm); qty. 10
T-A045ZH-1000.045″ (1.2 mm); qty. 100
HELP ME IDENTIFY MY PRODUCT LEARN MORE BUTTON

Back to Top

Tregaskiss Nozzles

Part NumberDescription
401-14-62Thread-on, 5/8″ bore, 1/8″ recess, tapered, 1.062″ O.D., copper; qty. 10
401-43-62Thread-on, 5/8″ bore, 1/8″ recess, tapered, 0.938″ O.D., copper; qty. 10
401-18-62Thread-on, 5/8″ bore, 1/8″ stick-out, tapered, 0.938″ O.D., copper; qty. 10
401-20-62Thread-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., copper; qty. 10
401-30-62TThread-on, 5/8″ bore, 1/8″ stick-out, bottleneck, 0.938″ O.D., brass; qty. 10
401-6-62Slip-on, 5/8″ bore, 1/8″ recess, tapered, 1.062″ O.D., copper; qty. 10
401-8-62Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 0.938″ O.D., copper; qty. 10
401-4-62Slip-on, 5/8″ bore, 1/8″ recess, tapered, 0.938″ O.D., copper; qty. 10
401-5-62Slip-on, 5/8″ bore, 1/4″ recess, tapered, 1.062″ O.D., copper; qty. 10
401-48-62Slip-on, 5/8″ bore, flush, bottleneck, 1.062″ O.D., copper; qty. 10
401-81-62Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., copper; qty. 10
401-7-62Slip-on, 5/8″ bore, 1/4″ recess, tapered, 1.106″ O.D., brass; qty. 10
401-71-62Slip-on, 5/8″ bore, 1/8″ recess, tapered, 1.106″ O.D., brass; qty. 10
401-87-62Slip-on, 5/8″ bore, 1/8″ stick-out, tapered, 1.062″ O.D., brass; qty. 10
401-30-62Slip-on, 5/8″ bore, 1/8″ stick-out, bottleneck, 0.938″ O.D., brass; qty. 10

QUICK LOAD® Liners

Part NumberDescription
415-30-6Qfor 0.030″ wire, high carbon steel, round wound, 6 ft
415-30-15Qfor 0.030″ wire, high carbon steel, round wound, 15 ft
415-35-6Qfor 0.035″-0.045″ wire, high carbon steel, round wound, 6 ft
415-35-10Qfor 0.035″-0.045″ wire, high carbon steel, round wound, 10 ft
415-35-15Qfor 0.035″-0.045″ wire, high carbon steel, round wound, 15 ft
415-116-6Qfor 0.045″-1/16″ wire, high carbon steel, round wound, 6 ft
415-116-10Qfor 0.045″-1/16″ wire, high carbon steel, round wound, 10 ft
415-116-15Qfor 0.045″-1/16″ wire, high carbon steel, round wound, 15 ft
415-564-6Qfor 1/16″-5/64″ wire, high carbon steel, round wound, 6 ft
415-564-15Qfor 1/16″-5/64″ wire, high carbon steel, round wound, 15 ft
415-332-6Qfor 0.078″-3/32″ wire, high carbon steel, round wound, 6 ft
415-332-15Qfor 0.078″-3/32″ wire, high carbon steel, round wound, 15 ft

QUICK LOAD Pro Liners for Cored Wire

Part NumberDescription
415-35-062Qfor 0.035″-0.045″ wire, galvanized, D-wound (requires 415-26 retainer)
415-116-062Qfor 0.045″-1/16″ wire, galvanized, D-wound (requires 415-31 retainer)

QUICK LOAD Liner Retainers

Required for initial installation only (sold separately)

Part NumberDescription
415-26QUICK LOAD liner retainer, for 0.030″-5/64″ wire
415-31QUICK LOAD liner retainer, for 0.045″-1/16″ wire (required for 415-116-062Q)
415-24QUICK LOAD liner retainer, for 0.078″-3/32″ wire

Reamer Cutter Blades

Part NumberDescription
RCT-01for 5/8″ (15.88 mm) nozzles; qty. 1

Transform the way you manage your robotic MIG welding gun consumbles. AccuLock™ R consumables for better throughput.

Please accept preferences, statistics, marketing cookies to watch this video.
Please accept preferences, statistics, marketing cookies to watch this video.

Documentation

Consumables

Videos

Related Products

Product Updates

Related Articles

Press Releases

Additional Resources