• Tregaskiss MIG Welding Products
  • Tregaskiss MIG Welding Products
  • Tregaskiss MIG Welding Products
  • Tregaskiss MIG Welding Products
  • Tregaskiss MIG Welding Products


New Ethernet Communications Capability

Ethernet Options Enables Greater Control and Flexibility

The new TOUGH GUN™ TT3E Reamer robotic nozzle cleaning station from Tregaskiss continues to offer the same high levels of durability, serviceability and repeatability, and is now further enhanced by digital Ethernet communications that better integrate this unit into the digital controls infrastructure of your facility. 

Discrete control enables flexibility to monitor all motions and insert recovery or fault control, including a try again function after the first fault, and stop after the second fault. This new robotic nozzle cleaning station also has the ability to provide error diagnostics such as real time onsite troubleshooting without having to remove the unit from the cell.

Enjoy greater control optimization, remote monitoring capability, and faster troubleshooting of all discrete TOUGH GUN Reamer I/O functions to facilitate increased productivity in your robotic welding applications.

Access the most recent version of the program software from the Software tab below.


Download PDFSpec Sheet: English  |  Español 

Features and Benefits

Reduced Integration Time (compared to analog models)

  • Eliminates the need for an analog switch
  • Reduces cabling requirements in the robotic cell by up to 2 sets depending on number of additional peripherals
  • Fewer components = fewer potential points of failure

Remote Monitoring Capability

  • Error diagnostic and recording capability to minimize troubleshooting time
  • Enables remote monitoring and troubleshooting of the I/O of each reamer function and their allowable parameters through the PLC

Greater Control Optimization

  • Discrete control enables flexibility to monitor and adjust all motions for increased productivity in your specific welding application
    • In automatic mode, gain control over double-stroke, start-up dwell time, and top of stroke dwell time
    • In manual mode, gain control over the sequence and duration of each function by firing individual I/O (for advanced / challenging applications)

Safe and Accurate Setup

  • External setup switches allow independent operation of the sprayer, clamp and spindle during manual setup
  • Cutter blade lifts into position but does not spin when activated by the spindle setup swtich
  • Manual override switches are momentary for increased safety during setup / troubleshooting
  • Air blast and wire cutter are integrated through the Ethernet block, reducing setup time and maintenance of these options

Scalability and Flexibility

  • Use the TOUGH GUN TT3E Reamer as a switch to link robots with a single Ethernet port to an Ethernet welder or other peripheral devices for increased flexibilty
  • The base unit (configured with no options) has 6 configurable I/O, which allows monitoring or control of additional devices in the robotic cell

Ease of Maintenance

  • All wiring connections are built into the new wiring harness, reducing the risk of wiring errors during maintenance
  • Improved wire labeling for easy identification

Dependable Performance


  • 3/4 Horsepower lubricated air motor with gear reducer provides the high torque required for spatter removal at the lower speed needed to protect the spindle and cutter blade from excessive wear
  • No damage will occur to the air motor if stalling occurs
  • Operates in any position


  • Spindle has rotating rod accuracy of 0.001" - 0.004" at its extended position for cutting repeatability and optimized spatter removal
  • Fixed motor, clamp and v-block provide cutting accuracy and repeatability – No manual adjustments to nozzle clamps, cutter height, or motor height are required


  • All pneumatic valves are internally mounted
  • External setup switches are protected and seals protect points of entry

Back to Top


  • Rated voltage: 24 VDC
  • Operating voltage: ±10% of rated voltage
  • Power consumption: max. wattage in operation 5.3 W
  • Air requirements: 80 to 100 psi (5.0 to 7.0 bar) at 16 CFM (7.5 L/s)
  • Air motor (at min. air requirement): stall torque at 80 psi (5.5 bar) = 83 in.-lbs. (9.4 Nm)
  • Weight: ≃ 50 lbs (23 kg)*
  • Product dimensions (L x W x H): 13.5" x 11.25" x 21.0" (343 mm x 286 mm x 534 mm)*

Optional Features


Technical Documentation

  • Download the OM-TT3 TOUGH GUN TT3E Reamer Owner's Manual  English 

*The optional features are sold separately or added as options when ordering. These features can change the weight and physical dimensions of the product.

Configure your TOUGH GUN™ TT3E Reamer Robotic Nozzle Cleaning Station online

 Configure your TOUGH GUN TT3 Reamer Online!
 Find the replacement parts list for the TOUGH GUN TT3 Reamer part number you already have!

Configure the TOUGH GUN TT3E Reamer part number you need, or reverse lookup your existing reamer part number using our improved online configurator. This new mobile-friendly configurator provides additional resources and an expanded replacement parts list with diagram, plus other valuable takeaways, that you can print, save in PDF format, or share via email.


This dedicated motor lubricator maximizes performance and protects your TOUGH GUN™ Reamer investment by extending the life of the motor, and is highly recommended for use in damp and moisture rich environments. Factory set for optimal pneumatic oil lubrication, the lubricator is available as an option when configuring your new unit* or is retrofittable to your existing TOUGH GUN TT3E Reamer.

*Ordering your new TOUGH GUN Reamer with the factory-installed lubricator option increases your warranty from 1 to 2 years, or increase your warranty to 3 years with the factory-installed lubricator option plus exclusive use of TOUGH GARD™ Anti-Spatter Liquid.




Filter / Regulator

The Filter / Regulator unit from Tregaskiss is another recommended accessory that helps extend the life of your TOUGH GUN Reamer. The filter cleans the air supply to the reamer and restricts debris from reaching the motor, keeping it uncontaminated and ensuring maximium performance and longer life, while the regulator works to ensure optimal air pressure is achieved at the unit.



Spray Containment

The innovative Spray Containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin, improving the air quality of the working environment and maintaining the cleanliness of the weld cell. Click here to learn more.

Spray Containment

TOUGH GUN Wire Cutter

The TOUGH GUN Wire Cutter removes the ball-end of the welding wire to provide smooth arc starts and consistent wire stick-out. The TOUGH GUN Wire Cutter easily cuts a variety of wire types from stainless steel to aluminum to flux-core in wire sizes up to 1/16". Click here for more information.


TOUGH GUN Wire cutter


Nozzle Detection

Nozzle Detection for the TOUGH GUN TT3E Reamer uses a proximity sensor mounted on the side of the reamer that can be used independently of the ream cycle. The robot positions the front end of the MIG gun close to the sensor to detect the presence of the nozzle. If the nozzle is present, a signal is then sent back to the robot controller or PLC. Learn more about the nozzle detection system.

Nozzle Detection

Tregaskiss Cutter Blades

Improved performance. Competitive new pricing.

Tregaskiss is pleased to announce improvements to the design of our cutter blades. These new cutter blades are engineered from harder, stronger material for enhanced performance and durability, making them more resistant against breaking, snapping, chipping or cracking. Click here to find out more.

Tregaskiss Cutter Blades


Tregaskiss V-Blocks

Compatible with Tregaskiss™ and most competitive consumables, these four-sided v-blocks ensure your cutter is concentric with your consumables and your nozzle bore to guarantee the most effective ream. Choose from five available v-block options when configuring your new TOUGH GUN TT3 Reamer.

Tregaskiss V-Blocks

TOUGH GUN™ Reamer Stand

Custom Height. Quick Installation. Easy on the budget.

Tregaskiss provides a simple fixed height durable stand for all TOUGH GUN TT3 Reamer models. Each TOUGH GUN Reamer Stand can be ordered to a custom height between 18- and 45-inches. Click here to learn more.

TOUGH GUN Reamer Stand


TOUGH GARD™ Anti-Spatter Liquid

TOUGH GARD Anti-Spatter Liquid was developed to address the performance requirements of metal fabricators. TOUGH GARD Anti-Spatter Liquid won't harm machinery, it cleans up easily with no residue, it's safe to use and it's safe for the environment. Helping prevent spatter adhesion and extending the life of consumables, TOUGH GARD Anti-Spatter Liquid reduces downtime thus lowering operating and maintenance costs. Click here to learn more.

TOUGH GARD Anti-Spatter Liquid


TOUGH GARD Multi-Feed System

The TOUGH GARD Multi-Feed System for anti-spatter solution can connect up to ten TOUGH GUN TT3 Reamer stations. This system eliminates the need to refill anti-spatter reservoirs on a frequent basis, resulting in lower operating costs, reduced downtime and increased safety. Click here for more information.

TOUGH GARD Multi-Feed System

Back to Top

Product Literature

How-To Guides and Videos


 Additional Resources

Tech Connection Product News