QUICK LOAD Liner AutoLength System

The QUICK LOAD® liner AutoLength™ system is designed specifically to minimize downtime, wire feeding and quality issues commonly associated with the liner being cut to an incorrect length.

Short liners are a common root cause of poor wire feeding. Further, a short liner does not have a chance of properly seating in the retaining head — often resulting in “bird-nesting” of the welding wire or premature contact tip failure and wear.

Wire feeding challenges reduce efficiency of the welding process and cause undesirable (and expensive) downtime. A system upgrade to this new innovative product can help improve welding efficiency and reduce costly downtime.  

Part NumberDescription
214-84for 0.035″ – 0.045″ wire; interchangeable with 214-4 power pin
214-94for 0.052″ – 1/16″ wire; interchangeable with 214-4 power pin
Part NumberDescription
214-84for 0.035″ – 0.045″ wire; interchangeable with 214-4 power pin
214-94for 0.052″ – 1/16″ wire; interchangeable with 214-4 power pin

AutoLength™ Pins

For Miller® Feeders

Part NumberDescription
214-81for 0.035″ – 0.045″ wire; interchangeable with 214-1 power pin
214-91for 0.052″ – 1/16″ wire; interchangeable with 214-1 power pin

For Tweco® #4 Feeders

Part NumberDescription
214-80for 0.035″ – 0.045″ wire; interchangeable with 214 power pin
214-90for 0.052″ – 1/16″ wire; interchangeable with 214 power pin

For Tweco #5 Feeders

Part NumberDescription
214-812for 0.035″ – 0.045″ wire; interchangeable with 214-12 power pin
214-912for 0.052″ – 1/16″ wire; interchangeable with 214-12 power pin

For Lincoln® Feeders

Part NumberDescription
214-87for 0.035″ – 0.045″ wire; interchangeable with 214-7 power pin
214-97for 0.052″ – 1/16″ wire; interchangeable with 214-7 power pin
214-840for 0.035″ – 0.045″ wire; interchangeable with 214-40 power pin
214-940for 0.052″ – 1/16″ wire; interchangeable with 214-40 power pin

For Panasonic® Feeders

Part NumberDescription
214-830for 0.035″ – 0.045″ wire; interchangeable with 214-30 power pin
214-930for 0.052″ – 1/16″ wire; interchangeable with 214-30 power pin

For Fronius® Feeders

Part NumberDescription
214-817for 0.035″ – 0.045″ wire; interchangeable with 214-17 power pin
214-917for 0.052″ – 1/16″ wire; interchangeable with 214-17 power pin
214-841for 0.035″ – 0.045″ wire; interchangeable with 214-41 power pin
214-941for 0.052″ – 1/16″ wire; interchangeable with 214-41 power pin

For Euro Feeders

Part NumberDescription
425-820Efor 0.035″ – 0.045″ wire; interchangeable with 425-20E power pin
425-920Efor 0.052″ – 1/16″ wire; interchangeable with 425-20E power pin

For L-Tec® Feeders

Part NumberDescription
214-84for 0.035″ – 0.045″ wire; interchangeable with 214-4 power pin
214-94for 0.052″ – 1/16″ wire; interchangeable with 214-4 power pin

Documentation

Consumables

How-Tos

Videos

Related Products

Related Articles

Additional Resources