Quick Connect Blocks and Adaptors


For those who have feeder models not found in our Power Pins list, or for those welders who use their Bernard™ MIG Gun on various feeder models, Quick Connect Blocks and Adaptors are available. Quick Connect Blocks form an adaptive bridge from your existing gun feeder connection to a different kind of feeder connection.

 

Download PDFSpec Sheet (E-Z Feed Quick Disconnect Feeder End Adaptor Kits): English

Download PDFSpec Sheet (Quick Connect Blocks and Adaptors): English

Compatibility

Bernard offers Quick Connect Blocks and Adaptors for the following MIG welding guns:

Quick Connect Blocks and Adaptors

For BTB MIG Guns, TGX™ MIG Guns, and former T-Gun™ Series MIG Guns

Quick Connect Blocks

417

Tweco® #4 style power pin (part # 214) to quick connect block to adaptor / power pin to feeder

417-50

Euro connection (part # 425) to quick connect block to adaptor / power pin to feeder

417-60

Tweco #5 style power pin (part # 214-12) to quick connect block to adaptor / power pin to feeder

417-63

Miller® style power pin (part # 214-6-xx or 214-1) to quick connect block to adaptor / power pin to feeder

417-64

Miller style power pin (part # 214-6-xx or 214-1) to quick connect block to Euro feeder

417-65

Tweco #4 style power pin (part # 214) to quick connect block to Euro feeder

Back to Top

Adaptors

For Airco® Feeders

418-1

for models: AHF-E1, AHF-G, AHF-L, AHF-N, AHF-R, AHF-S, AHF-T, AHF-U, AHF-V, Mobilmatic, Little Dipper Dipstick-160, DIP-PAC-200, DIP-COR-300

   

For Auto Arc® Feeders

418-1

for models: MUREX 50

   

For Bancroft® Feeders

418-4

for models: 700

418-6

for models: 750, 775

418-29

for models: 750, 755

   

For Dayton® Feeders

418-14

for all models

   

For ESAB® Feeders

418-3

for models: A10, Smash Weld-180, MEC 30/44, MIGGY 125, Optimatic 30/44

418-9

for models: WFU 30, WFU 50

   

For Ford® Feeders

418-4

for models: Rotunda®

   

For Gabriel® Feeders

418-6

for models: Gabriel

   

For Gilliland® Feeders

418-21

for models: Gilliland, San Diego

   

For Hobart® Feeders

418-3

for models: A10, Smash Weld-180, MEC 30/44, MIGGY 125, Optimatic 30/44

418-4

for models: 27, 27 A, Dualmatic 27/70, H3S, H4S, H6S, 44, 45, 70, 70S, SP100, BETA-MIG 250 (Old Style), MEGA-CONDS

   

For Hobart - Tweco® #4 Setups

418-28

for models: BETA-MIG (New Style) BETA-MIG250 and 251, Dual Feeder, Digital 2000, Dual Digital, Porta Feed 17, Ultra Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC

   

For Hobart - Tweco #5 Setups

418-29

for models: BETA-MIG (New Style) BETA-MIG250 and 251, Dual Feeder, Digital 2000, Dual Digital, Porta Feed 17, Ultra Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC

   

For Kobelco® Feeders

418-33

for most models and CV feeders

418-35

for most models

   

For Lee® Feeders

418-14

for all models

   

For Lincoln® Feeders

418-5

for models: MN-1, LN4, LN5, LN6

418-6

for models: LN7, LN9, LN22, LN25

418-37

for models: NA2, NA3, NA4, NA5

   

For Linde® / L-Tec® Feeders

418-5

for models: EH-8, MIG-32, 160, V160, 3 IN 1, L-Tec 225, SWM-20, SWM-22, SWM-31, SWM-32, SWM-34, SWM-37

418-7

for models: MM-253, SWM-11A, SWM-14, AWM-20, SWM-34, SWM-37, AGA 200, SWM-31, SWM-39, EH8, V160, MIG31, MIG32, 3 IN1, MM206

418-8

for models: DigiMIG & DigiMIG Dual EH1, EH5, EH10, EH11, SHE-4, SHE-5, SWM11, SWM11B, SWM12, SWM13, SWM23, SWM24, SWM25, SWM26, SWM35, VAM2, L-Tec 35, MIG 35, DigiPulse, SHE 4 & 5

   

For Matco® Feeders

418-14

for all models

   

For Mid-States® Feeders

418-1

for models: ARC 160

418-9

for models: W33

   

For Miller® Feeders

418-1

for models: MHFC-H, MHFC-R1

418-4

for models: MW1, MW100

418-9

for models: 10A, 10E, 30A, 30B, 70A, 80A, Spoolmatic 150, Millermatic 35 (Old Style)

418-10

for models: Cricket Intellimatic Sidekick, D-51A, Millermatic 90, 120, 130, 150, 200, 250, MM-35 (New), New Automatic 1, PortoMIG, S-42GL, S52A, S-54A, Swing Arc-Dual, Swing Arc-Single, S-32S, S64M, 52D, 54D, 52E, 54E, ALL 22 and 60 Series Feeders

   

For NAPA® Feeders

418-14

for all models

   

For OTC Daihen® Feeders

418-14

for models: CM231

418-39

for models: CM741, CMRE-741, AF4001, D Series

   

For OXO™ Feeders

418-4

for models: 760

418-9

for models: P120

   

For Panasonic® Feeders

418-27

for models: Panasonic

   

For P&H / Chemtron® Feeders

418-3

for models: RF31, RFF51, WC10, 10V, RF3, RF5, RF6

418-14

for models: RF1, RF5 (OLD)

   

For Powcon® Feeders

418-9

for models: Power Drive 1, Power Drive 1 E, 200 SMF

   

For Powermate® Feeders

418-14

for models: 90, 160, 225

   

For Rankin® Feeders

418-9

for all models

   

For Seelye® Feeders

418-14

for all models

   

For Snap-On® Feeders

418-14

for models: Portable MIG, YA205

Back to Top

For W-Gun™ MIG Guns, and former Q-Gun™ and S-Gun™ Series MIG Guns

Bernard Quick Disconnect Block Kits

1199

Quick Disconnect Block Kit; includes power pin part # 2200008

Back to Top

Bernard E-Z Feed Adaptors

For Airco® Feeders

4988

for models: AHF-N, AHF-R, AHF-S, AHF-T, AHF-U, AHF-V, AHF-J, AHF-L, AHF-W (incl. pre-cut guide tubes)

4820K

for models: Dippak 250, 300, MIGhty 2E, 4HD, IIE, IVHD, CEMIG 169T, 200T

   

For Bernard™ Quick Disconnects

4920

fits all existing Bernard adaptors

   

For Century® Feeders

4820K

for models: 100, 130, 150, 160, 200, 225, 250, Powermate 225

   

For ESAB® Feeders

4970

for most models (incl. pre-cut guide tubes)

4820K

for models: Me-2, MIGmaster 180

   

For European Feeders

4970A

for most European models

   

For Gelco® Feeders

4820P

for all models

   

For Hobart® Feeders

4982

for models: all models except Beta-MIG 200-2000

4820G

for models: Beta-MIG 200-2000 Models 17 and 19

   

For Lincoln® Feeders

4981

for models: LN-4, LN-5, LN-6, LN-8, LN-9 (including pre-cut guide tubes and plugs)

4986

for models: LN-7, SP-200, LN-22 (including pre-cut guide tubes and plugs)

   

For Linde® Feeders

4984

for models: SWM-11, 11B, 23, 24, 25, 26, 35, SHE-3, SHE-5, SHE-10, DigiMIG (including pre-cut guide tubes)

4984A

for models: DigiMIG

4984B

for various models

   

For L-Tec® Feeders

4820L

for models: MIG-31, SWM-30, SWM-31

   

For Machinery & Weldor Feeders

4983

for models: MHFC-H, MHFC-R1 (including pre-cut guide tubes)

   

For Miller® Feeders

4983

for models: 10, 30, 70, 80 series (including pre-cut guide tubes)

4995

for models: 542 GL, Swing Arc, Porta-MIG, Millermatic 40, 50, MIGmate, Millermatic 130, S-42S, S32-P (including pre-cut guide tubes and plugs)

4820G

for models: MIGman 105 (including pre-cut guide tubes)

   

For National® Feeders

4820N

for most models

   

For OTC Daihen® Feeders

4820P

for most models

   

For Panasonic® Feeders

4820N

for models: YW501FK

   

For Powcon® Feeders

4820K

for models: PDP1, powerdrive 1, powerdrive 1E, DAV MIG

Back to Top

Product Literature