For those who have feeder models not found in our power pins list, or for those welders who use their MIG Gun on various feeder models, quick-connect blocks and adaptors are available.
Quick-connect blocks form an adaptive bridge from your existing gun feeder connection to a different kind of feeder connection.
Part Numbers
| 417 | Tweco® #4 style power pin (part # 214) to quick connect block to adaptor / power pin to feeder |
| 417-50 | Euro connection (part # 425) to quick connect block to adaptor / power pin to feeder |
| 417-60 | Tweco #5 style power pin (part # 214-12) to quick connect block to adaptor / power pin to feeder |
| 417-63 | Miller® style power pin (part # 214-6-xx or 214-1) to quick connect block to adaptor / power pin to feeder |
| 417-64 | Miller style power pin (part # 214-6-xx or 214-1) to quick connect block to Euro feeder |
| 417-65 | Tweco #4 style power pin (part # 214) to quick connect block to Euro feeder |
Part Numbers
| 1199 | Quick-disconnect block kit; includes power pin part # 2200008 |
Part Numbers
For Airco® Feeders
| 418-1 | for models: AHF-E1, AHF-G, AHF-L, AHF-N, AHF-R, AHF-S, AHF-T, AHF-U, AHF-V, Mobilmatic, Little Dipper Dipstick-160, DIP-PAC-200, DIP-COR-300 |
For Auto Arc® Feeders
| 418-1 | for models: MUREX 50 |
For Bancroft® Feeders
| 418-4 | for models: 700 |
| 418-6 | for models: 750, 775 |
| 418-29 | for models: 750, 755 |
For Dayton® Feeders
| 418-14 | for all models |
For ESAB® Feeders
| 418-9 | for models: WFU 30, WFU 50 |
For Ford® Feeders
| 418-4 | for models: Rotunda® |
For Gabriel® Feeders
| 418-6 | for models: Gabriel |
For Gilliland® Feeders
| 418-21 | for models: Gilliland, San Diego |
For Hobart® Feeders
| 418-4 | for models: 27, 27 A, Dualmatic 27/70, H3S, H4S, H6S, 44, 45, 70, 70S, SP100, BETA-MIG 250 (Old Style), MEGA-CONDS |
For Hobart; Tweco® #4 Setups
| 418-28 | for models: BETA-MIG (New Style) BETA-MIG250 and 251, Dual Feeder, Digital 2000, Dual Digital, Porta Feed 17, Ultra Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC |
For Hobart; Tweco #5 Setups
| 418-29 | for models: BETA-MIG (New Style) BETA-MIG250 and 251, Dual Feeder, Digital 2000, Dual Digital, Porta Feed 17, Ultra Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC |
For Kobelco® Feeders
| 418-33 | for most models and CV feeders |
| 418-35 | for most models |
For Lee® Feeders
| 418-14 | for all models |
For Lincoln® Feeders
| 418-5 | for models: MN-1, LN4, LN5, LN6 |
| 418-6 | for models: LN7, LN9, LN22, LN25 |
| 418-37 | for models: NA2, NA3, NA4, NA5 |
For Linde® / L-Tec® Feeders
| 418-5 | for models: EH-8, MIG-32, 160, V160, 3 IN 1, L-Tec 225, SWM-20, SWM-22, SWM-31, SWM-32, SWM-34, SWM-37 |
| 418-7 | for models: MM-253, SWM-11A, SWM-14, AWM-20, SWM-34, SWM-37, AGA 200, SWM-31, SWM-39, EH8, V160, MIG31, MIG32, 3 IN1, MM206 |
| 418-8 | for models: DigiMIG & DigiMIG Dual EH1, EH5, EH10, EH11, SHE-4, SHE-5, SWM11, SWM11B, SWM12, SWM13, SWM23, SWM24, SWM25, SWM26, SWM35, VAM2, L-Tec 35, MIG 35, DigiPulse, SHE 4 & 5 |
For Matco® Feeders
| 418-14 | for all models |
For Mid-States® Feeders
| 418-1 | for models: ARC 160 |
| 418-9 | for models: W33 |
For Miller® Feeders
| 418-1 | for models: MHFC-H, MHFC-R1 |
| 418-4 | for models: MW1, MW100 |
| 418-9 | for models: 10A, 10E, 30A, 30B, 70A, 80A, Spoolmatic 150, Millermatic 35 (Old Style) |
| 418-10 | for models: Cricket Intellimatic Sidekick, D-51A, Millermatic 90, 120, 130, 150, 200, 250, MM-35 (New), New Automatic 1, PortoMIG, S-42GL, S52A, S-54A, Swing Arc-Dual, Swing Arc-Single, S-32S, S64M, 52D, 54D, 52E, 54E, ALL 22 and 60 Series Feeders |
For NAPA® Feeders
| 418-14 | for all models |
For OTC Daihen® Feeders
| 418-14 | for models: CM231 |
| 418-39 | for models: CM741, CMRE-741, AF4001, D Series |
For OXO™ Feeders
| 418-4 | for models: 760 |
| 418-9 | for models: P120 |
For Panasonic® Feeders
| 418-27 | for models: Panasonic |
For P&H / Chemtron® Feeders
| 418-14 | for models: RF1, RF5 (OLD) |
For Powcon® Feeders
| 418-9 | for models: Power Drive 1, Power Drive 1 E, 200 SMF |
For Powermate® Feeders
| 418-14 | for models: 90, 160, 225 |
For Rankin® Feeders
| 418-9 | for all models |
For Seelye® Feeders
| 418-14 | for all models |
For Snap-On® Feeders
| 418-14 | for models: Portable MIG, YA205 |
Part Numbers
For Airco® Feeders
| 4988 | for models: AHF-N, AHF-R, AHF-S, AHF-T, AHF-U, AHF-V, AHF-J, AHF-L, AHF-W (incl. pre-cut guide tubes) |
| 4820K | for models: Dippak 250, 300, MIGhty 2E, 4HD, IIE, IVHD, CEMIG 169T, 200T |
For Bernard® Quick-Disconnects
| 4920 | fits all existing Bernard adaptors |
For Century® Feeders
| 4820K | for models: 100, 130, 150, 160, 200, 225, 250, Powermate 225 |
For ESAB® Feeders
| 4970 | for most models (incl. pre-cut guide tubes) |
| 4820K | for models: Me-2, MIGmaster 180 |
For European Feeders
| 4970A | for most European models |
For Gelco® Feeders
| 4820P | for all models |
For Hobart® Feeders
| 4982 | for models: all models except Beta-MIG 200-2000 |
| 4820G | for models: Beta-MIG 200-2000 Models 17 and 19 |
For Lincoln® Feeders
| 4981 | for models: LN-4, LN-5, LN-6, LN-8, LN-9 (including pre-cut guide tubes and plugs) |
| 4986 | for models: LN-7, SP-200, LN-22 (including pre-cut guide tubes and plugs) |
For Linde® Feeders
| 4984 | for models: SWM-11, 11B, 23, 24, 25, 26, 35, SHE-3, SHE-5, SHE-10, DigiMIG (including pre-cut guide tubes) |
| 4984A | for models: DigiMIG |
| 4984B | for various models |
For L-Tec® Feeders
| 4820L | for models: MIG-31, SWM-30, SWM-31 |
For Machinery & Weldor Feeders
| 4983 | for models: MHFC-H, MHFC-R1 (including pre-cut guide tubes) |
For Miller® Feeders
| 4983 | for models: 10, 30, 70, 80 series (including pre-cut guide tubes) |
| 4995 | for models: 542 GL, Swing Arc, Porta-MIG, Millermatic 40, 50, MIGmate, Millermatic 130, S-42S, S32-P (including pre-cut guide tubes and plugs) |
| 4820G | for models: MIGman 105 (including pre-cut guide tubes) |
For National® Feeders
| 4820N | for most models |
For OTC Daihen® Feeders
| 4820P | for most models |
For Panasonic® Feeders
| 4820N | for models: YW501FK |
For Powcon® Feeders
| 4820K | for models: PDP1, powerdrive 1, powerdrive 1E, DAV MIG |