NEW PRODUCT —

Tregaskiss Power Pin for Fronius VR1500 Wire Feeders

July 1, 2009

Tregaskiss has designed a power pin (part #214-41) that can be used in place of the actual Fronius® Power Pin for the VR15000 wire feeder.

This new power pin is compatible with Tregaskiss TOUGH GUN™ Robotic and Automatic MIG Guns and Bernard™ T-Gun™ Semi-Automatic MIG Guns (formerly Tregaskiss TOUGH GUN Semi-Automatic MIG Guns).

  • Threads into all Tregaskiss unicables (except Euro) and is the standard Fronius Power Pin for TOUGH GUN ThruArm™ Series Robotic MIG Guns
  • Compatible with Motoman® unicables on teh EA/SSA Series robots
  • Designed specifically for use with QUICK LOAD™ Liners

A liner cap adaptor (part #214-41-3) is also available for upgrading existing Fronius Power Pins to the QUICK LOAD Liner System.

Tregaskiss Power Pin 214-41 for Fronius wire feeders Tregaskiss Liner Cap 214-41-3
Tregaskiss™ Power Pin (part #214-41) is designed to replace
the actual Fronius® Power Pin for the VR1500 wire feeder
(part #4.045.848.638).
Upgrade the original Fronius® Power Pin to use with the
QUICK LOAD™ Liner System by replacing it with the
Tregaskiss Liner Cap (part #214-41-3).


Fronius wire feeders can come with several types of connections. The following chart indicates the recommended Tregaskiss Power Pin solution for each:

FRONIUS® FEEDER CONNECTION TYPE

TREGASKISS PART #

Fronius "North America" Power Pin

214-17

Tweco® #4

214

Euro Connection

Euro

Fronius Power Pin #4.045.848.638 for VR1500 Feeder

214-41

Fronius F++

Not Available