How To Upgrade from Conventional Liners to QUICK LOAD Liners


Replace Your Liner in Less Than 1/2 the Time with the QUICK LOAD™ Liner from Tregaskiss!

To convert to the QUICK LOAD Liner, update your conventional liner part number as per the chart below.
 

QUICK LOAD Liner Conversion Chart

WIRE SIZE

QUICK LOAD LINER

REPLACES CONVENTIONAL LINER

DESCRIPTION

LENGTH

I.D.

0.023"

415-23-15Q

415-23-15

High Carbon Steel - Round Wound

16.5'

0.050"

0.030"

415-30-6Q

415-30-6

High Carbon Steel - Round Wound

7.5'

0.062"

0.030"

415-30-15Q

415-30-15

High Carbon Steel - Round Wound

16.5'

0.062"

0.035"-0.045"

415-35-6Q

415-35-6

High Carbon Steel - Round Wound

7.5'

0.075"

0.035"-0.045"

415-35-10Q

415-35-10

High Carbon Steel - Round Wound

11.5'

0.075"

0.035"-0.045"

415-35-15Q

415-35-15

High Carbon Steel - Round Wound

16.5'

0.075"

0.035"-0.045"

415-35-25Q

415-35-25

High Carbon Steel - Round Wound

26.5'

0.075"

0.045"-1/16"

415-116-6Q

415-116-6

High Carbon Steel - Round Wound

7.5'

0.089"

0.045"-1/16"

415-116-10Q

415-116-10

High Carbon Steel - Round Wound

11.5'

0.089"

0.045"-1/16"

415-116-15Q

415-116-15

High Carbon Steel - Round Wound

16.5'

0.089"

0.045"-1/16"

415-116-25Q

415-116-25

High Carbon Steel - Round Wound

26.5'

0.089"

1/16"-5/64"

415-564-6Q

415-564-6

High Carbon Steel - Round Wound

7.5'

0.097"

1/16"-5/64"

415-564-15Q

415-564-15

High Carbon Steel - Round Wound

16.5'

0.097"

1/16"-5/64"

415-564-25Q

415-564-25

High Carbon Steel - Round Wound

26.5'

0.097"

0.078"-3/32"

415-332-6Q

415-332-6

High Carbon Steel - Flat Wound

7.5'

0.125"

0.078"-3/32"

415-332-15Q

415-332-15

High Carbon Steel - Flat Wound

16.5'

0.125"

0.078"-3/32"

415-332-25Q

415-332-25

High Carbon Steel - Flat Wound

26.5'

0.125"

LINER RETAINERS — REQUIRED FOR INITIAL LINER INSTALLATION

0.078"-3/32"

415-24

N/A

QUICK LOAD Liner Retainer* (Sold Separately)

0.030"-5/64"

415-26

N/A

QUICK LOAD Liner Retainer* (Sold Separately)

0.030"-5/64"

415-37

N/A

QUICK LOAD Liner Retainer** (Sold Separately)

*Compatible with Tregaskiss™ TOUGH GUN™ Robotic and Automatic MIG GunsBernard™ T-Gun™ Semi-Automatic MIG Guns (formerly Tregaskiss TOUGH GUN Semi-Automatic MIG Guns), and Bernard TGX™ Semi-Automatic MIG Guns (formerly Tregaskiss TGX Semi-Automatic MIG Guns)

**Compatible with most Tweco® MIG Guns


Benefits of the QUICK LOAD Liner System:

  • Requires less than 1/2 the time and effort to replace (compared to conventional liners)
  • Liner replacement occurs through the neck of the MIG gun
  • Gun remains attached to the feeder
  • No need to cut and waste wire!
  • No need to climb up to change liners in semi-automatic guns connected to boom mounted feeders
  • Change liner from safe zone within the robotic cell during routine pauses in production


FAQs about QUICK LOAD Liners

Question:
Why is liner replacement so much faster with the QUICK LOAD Liner?
Answer:
During replacement, you only need to remove the nozzle and retaining head (with tip in place) in order to remove the old QUICK LOAD Lienr and then insert its replacement. The gun remains in place and is used as a guide to feed the new liner into the gun. Not having to remove the gun from the feeder is a significant time saver.


Question:
How is the QUICK LOAD Liner Retainer installed?
Answer:
During the initial installation of the QUICK LOAD Liner, the retainer remains mated with the liner while it is installed through the rear of the gun like a conventional liner. Subsequent liner replacements occur through the front of the gun without a need to replace the retainer. This is why it is critical to order a liner retainer for the first use of every QUICK LOAD Liner.


Question:
How does the QUICK LOAD Liner stay in place?
Answer:
Front-loading QUICK LOAD Liners interface with a QUICK LOAD Liner Retainer that is seated within the power pin of the gun on first use.


Question:
Where can I learn more about QUICK LOAD Liners?
Answer:
Visit Tregaskiss.com/QUICKLOAD or call your ITW MIG Account Manager. 

Back To Top