How to Install Centerfire HD Series Consumables 

Standard Installation –

  1. Install insulator cap over neck.
  2. Trim liner to between 5/8″ and 3/4″ beyond neck thread.
  3. Torque diffuser onto neck to approximately 12 ft.-lbs.
  4. Insert tip into gas diffuser.
  5. Thread nozzle body onto gas diffuser / tip, and tighten firmly by hand.
  6. Thread nozzle cone onto nozzle body, and tighten firmly by hand.

Installation with Conversion Adaptor –

  1. Install conversion adaptor.
  2. Install insulator cap over conversion adaptor.
  3. Trim liner to between 5/8″ and 3/4″ beyond adaptor thread.
  4. Torque diffuser onto adaptor to approximately 12 ft.-lbs.
  5. Insert tip into gas diffuser.
  6. Thread nozzle body onto gas diffuser / tip, and tighten firmly by hand.
  7. Thread nozzle cone onto nozzle body, and tighten firmly by hand.
How to install Centerfire consumables
How to install Centerfire consumables, helpful tip

Helpful Tip: The base of every Centerfire™ Gas Diffuser has a 3/4″ diameter, and can be used as a liner trimming guide.