How-To Guides and Videos

How to Videos and Guides


The following How-To Guides and Videos are provided to assist you with the maintenance, repair and upgrading of your Tregaskiss™ MIG guns, robotic peripherals and welding accessories.

 

Select the MIG gun line you're looking for to access its available How-To Guides and Videos:

 


 

TOUGH GUN™ CA3 MIG Guns

 

 

How to install the TOUGH GUN CA3 Gun connector and unicable in place of the legacy TOUGH GUN G1 Series MIG Gun

HTML

 

TOUGH GUN TA3 MIG Guns

 

 

How to replace an LSR Unicable

 

MP4

How to install an LSR Unicable

HTML

 

How to install an LSR Unicable Extension

HTML

 

How to install the Dual Shunt Kit (5800)

HTML

MP4

How to install front-end Air Blast for TOUGH GUN ThruArm™ Series MIG Guns

HTML

 

How to install the LSR Flange on an ABB® Robot

HTML

 

How to install the LSR Flange on an OTC Daihen® Robot

HTML

 

How to install a TOUGH GUN ThruArm Robotic MIG Gun onto a Motoman® Robot

HTML

 

How to install a TOUGH GUN TA3 MIG Gun onto a Panasonic® Robot

HTML

 

How to install a TOUGH GUN ThruArm MIG Gun equipped with TOUGH GUN I.C.E.™ Technology onto a KUKA® Robot

HTML

 

600 amp TOUGH GUN Robotic Water-Cooled MIG Guns

 

 

How to install QUICK LOAD™ Liners on guns equipped with wire brake

HTML

 

How to maintain your gun equipped with wire brake

HTML

 

Legacy TOUGH GUN G1 Series MIG Guns

 

 

How to install a TOUGH GUN I.C.E.™ Neck assembly

HTML

 

How to repair a Euro TOUGH GUN G1 Series MIG Gun

HTML

 

How to install air-blast

HTML

 

How to install or replace a neck

HTML

 

How to install an aluminum liner on a gun equipped with wire brake

HTML

 

How to maintain your gun equipped with wire brake

HTML

 

TOUGH GUN G2 Series MIG Guns

 

 

How to install or replace a neck

HTML

 

How to install or remove Wire Brake on a TOUGH GUN G2 Series MIG Gun

HTML

 

How to install an aluminum liner on a gun equipped with wire brake

HTML

 

How to maintain your gun equipped with wire brake

HTML

 

TOUGH GUN ThruArm™ G2 Series MIG Guns

 

 

How to install an LSR Unicable

HTML

 

How to install a TOUGH GUN ThruArm MIG Gun equipped with TOUGH GUN I.C.E. Technology onto a KUKA Robot

HTML

 

Select the MIG gun line you're looking for to access its available How-To Guides and Videos:

 


 

TOUGH GUN™ CA3 MIG Guns

  • How to install the TOUGH GUN CA3 Gun connector and unicable in place of the legacy TOUGH GUN G1 Series MIG Gun:  HTML
     

TOUGH GUN TA3 MIG Guns

  • How to install an LSR Unicable:  HTML
  • How to install an LSR Unicable Extension: HTML
  • How to install a Dual Shunt Cable (5800): MP4
  • How to install front-end Air Blast for TOUGH GUN ThruArm™ Series MIG Guns: HTML
  • How to install the LSR Flange on an ABB® Robot: HTML
  • How to install the LSR Flange on an OTC Daihen® Robot: HTML
  • How to install a TOUGH GUN ThruArm Robotic MIG Gun onto a Motoman® Robot: HTML
  • How to install a TOUGH GUN TA3 MIG Gun onto a Panasonic® Robot: HTML
  • How to install a TOUGH GUN ThruArm MIG Gun equipped with TOUGH GUN I.C.E.™ Technology onto a KUKA® Robot: HTML

 

600 amp TOUGH GUN Robotic Water-Cooled MIG Guns

  • How to install QUICK LOAD™ Liners on guns equipped with wire brake:  HTML
  • How to maintain your gun equipped with wire brake:  HTML
     

Legacy TOUGH GUN G1 Series MIG Guns

  • How to install a TOUGH GUN I.C.E.™ Neck assembly:  HTML
  • How to repair a Euro TOUGH GUN G1 Series MIG Gun:  HTML
  • How to install air-blast:  HTML
  • How to install or replace a neck:  HTML
  • How to install an aluminum liner on a gun equipped with wire brake:  HTML
  • How to maintain your gun equipped with wire brake:  HTML
     

TOUGH GUN G2 Series MIG Guns

  • How to install or replace a neck:  HTML
  • How to install or remove Wire Brake on a TOUGH GUN G2 Series MIG Gun: HTML
  • How to install an aluminum liner on a gun equipped with wire brake:  HTML
  • How to maintain your gun equipped with wire brake:  HTML
     

TOUGH GUN ThruArm™ G2 Series MIG Guns

  • How to install an LSR Unicable:  HTML 
  • How to install a TOUGH GUN ThruArm MIG Gun equipped with TOUGH GUN I.C.E. Technology onto a KUKA Robot: HTML

 

Select the category you're looking for to access its available How-To Guides and Videos:

 


 

TOUGH GUN™ TT3 Reamer

 

 

How to install the TOUGH GUN TT3 Reamer

 

WMV

How to install the TT3-500R sprayer valve retrofit kit

HTML

WMV

How to install the TOUGH GUN Wire Cutter

HTML

 

How to add the Lubricator

HTML

 

How to install the Filter/Regulator unit

HTML

 

How to change the 4-sided v-block

 

WMV

How to replace the cutter blade

 

WMV

How to replace the circuit board

 

WMV

How to replace the clamp limit switch

 

WMV

How to remove the motor and replace the belt

 

WMV

How to replace the upper and lower limit switches for the spindle

 

WMV

How to install the TT3-NOZ external nozzle detection (Home Interrupt version)

HTML

 

How to install the TT3-500 TOUGH GUN Sprayer

HTML

 

How to mount the SR-500 Sprayer

HTML

 

How to install the TOUGH GUN Reamer Stand

HTML

 

How to install the TOUGH GARD Multi-Feed System to the TOUGH GUN Reamer

HTML

 

TOUGH GUN TT Reamer (discontinued)

 

 

How to install the TOUGH GUN TT Reamer

HTML

 

TOUGH GARD™ Spatter Cleaner (discontinued)

 

 

How to install the PER-2599 motor replacement kit / mounting assembly kit

HTML

 

TOUGH GUN Sprayer

 

 

How to mount the RS-500 Sprayer as a stand-alone unit

HTML

 

TOUGH GUN Neck Checking Fixtures

 

 

How to use the TOUGH GUN Neck Checking Fixture

HTML

 

Select the category you're looking for to access its available How-To Guides and Videos:

 


 

TOUGH GUN™ TT3 Reamer

  • How to install the TOUGH GUN TT3 Reamer:  WMV
  • How to install the TT3-500R sprayer valve retrofit kit:  HTML  |  WMV
  • How to install the TOUGH GUN Wire Cutter:  HTML
  • How to add the Lubricator:  HTML
  • How to install the Filter/Regulator unit:  HTML
  • How to change the 4-sided v-block:  WMV
  • How to replace the cutter blade:  WMV
  • How to replace the circuit board:  WMV
  • How to replace the clamp limit switch:  WMV
  • How to remove the motor and replace the belt:  WMV
  • How to replace the upper and lower limit switches for the spindle:  WMV
  • How to install the TT3-NOZ external nozzle detection (Home Interrupt version):  HTML
  • How to install the TT3-500 TOUGH GUN Sprayer:  HTML
  • How to mount the SR-500 Sprayer:  HTML
  • How to install the TOUGH GUN Reamer Stand: HTML
  • How to install the TOUGH GARD Multi-Feed System to the TOUGH GUN Reamer:  HTML
     

TOUGH GUN TT Reamer (discontinued)

  • How to install the TOUGH GUN TT Reamer:  HTML
     

TOUGH GARD™ Spatter Cleaner (discontinued)

  • How to install the PER-2599 motor replacement kit / mounting assembly kit:  HTML
     

TOUGH GUN Sprayer

  • How to mount the RS-500 Sprayer as a stand-alone unit:  HTML
     

TOUGH GUN Neck Checking Fixtures

  • How to use the TOUGH GUN Neck Checking Fixture:  HTML

Select the category you're looking for to access its available How-To Guides and Videos:

 


 

TOUGH LOCK™ Consumables

 

 

How to install or replace TOUGH LOCK Consumables

HTML

 

How to convert from a single taper retaining head to a TOUGH LOCK Retaining Head featuring Dual Taper Technology

HTML

 

TOUGH ACCESS™ Consumables

 

 

How to install or replace TOUGH ACCESS Consumables

HTML

 

Conventional Liners

 

 

How to install or replace a conventional liner

HTML

 

How to replace a conventional liner with a QUICK LOAD™ Liner

HTML

MP4

How to change a conventional liner on guns equipped with wire brake

HTML

 

How to install an aluminum liner on MIG guns equipped with wire brake

HTML

 

QUICK LOAD™ Liners

 

 

3D animation (WMV)  English

   

How to install or replace a QUICK LOAD Liner

HTML

MP4

How to install QUICK LOAD Liner in the AutoLength System

HTML

 

How to install or replace QUICK LOAD Liner on TOUGH GUN™ThruArm™ Series MIG Guns with an LSR Unicable

HTML

 

How to install QUICK LOAD Liners on 600 amp TOUGH GUN Robotic Water-Cooled MIG Guns equipped with wire brake

HTML

 

QUICK LOAD Liner AutoLength™ System

 

 

3D animation (WMV)  English  |  Español  |  Français

 

 

How to install QUICK LOAD Liner in the AutoLength System

HTML

 

How to install the AutoLength Pin

HTML

 

Power Pins

 

 

How to install a power pin to a Tregaskiss™ MIG Gun

HTML

 

AutoLength Pins

 

 

How to install the AutoLength Pin

HTML

 

Select the category you're looking for to access its available How-To Guides and Videos:

 


 

TOUGH LOCK™ Consumables

  • How to install or replace TOUGH LOCK Consumables:  HTML
  • How to convert from a single taper retaining head to a TOUGH LOCK Retaining Head featuring Dual Taper Technology:  HTML
     

TOUGH ACCESS™ Consumables

  • How to install or replace TOUGH ACCESS Consumables:  HTML
     

Conventional Liners

  • How to install or replace a conventional liner:  HTML
  • How to replace a conventional liner with a QUICK LOAD™ Liner:  HTML  |  MP4
  • How to change a conventional liner on guns equipped with wire brake:  HTML
  • How to install an aluminum liner on MIG guns equipped with wire brake:  HTML
     

QUICK LOAD™ Liners

  • 3D animation (WMV):  English
  • How to install or replace a QUICK LOAD Liner:  HTML  |  MP4
  • How to install QUICK LOAD Liner in the AutoLength™ System:  HTML
  • How to install or replace QUICK LOAD Liner on TOUGH GUN™ThruArm™ Series MIG Guns with an LSR Unicable:  HTML
  • How to install QUICK LOAD Liners on 600 amp TOUGH GUN Robotic Water-Cooled MIG Guns equipped with wire brake:  HTML
     

QUICK LOAD Liner AutoLength™ System 

  • 3D animation (WMV):  English  |  Español  |  Français
  • How to install QUICK LOAD Liner in the AutoLength System:  HTML
  • How to install the AutoLength Pin:  HTML
     

Power Pins

  • How to install a power pin to a Tregaskiss™ MIG Gun:  HTML
     

AutoLength Pins

  • How to install the AutoLength Pin:  HTML