Technical Conversion Information | 600 amp Robotic Water-Cooled MIG Guns
To convert from an existing Tregaskiss® keyed or quick-change robotic water-cooled MIG gun to the Tregaskiss 600 amp robotic water-cooled model, you will require the following resources:
Refer to the robotic setup drawing links below to select the correct combination of MIG gun and mounting arm.
Robotic Setup Drawings (2D)
The following drawings show standard configurations of the Tregaskiss keyed and quick-change robotic water-cooled MIG guns side by side with their recommended Tregaskiss 600 amp robotic water-cooled MIG gun replacements:
- Replacement setups for standard 650 amp keyed water-cooled robotic MIG gun configurations (PDF)
- Replacement setups for standard 650 amp quick-change water-cooled MIG gun configurations (PDF)
- New setup configurations for Tregaskiss 600 amp robotic water-cooled MIG guns – conventional and G2-style mounting arm options (PDF)
If you have a neck not listed in a standard setup, please contact us for more information.