How To Maintain Your Tregaskiss Robotic Water-Cooled MIG Gun Equipped with Wire Brake

Wire Brake Tool #450-17 Instructions

  1. Remove Wire Brake.
  2. Slide the Wire Guide Holder out of the connector cone assembly.
  3. Clean any debris or residue on the Wire Guide Holder.

To Reassemble the Wire Guide Holder

  1. Line up the Wire Brake Tool with the Wire Guide Holder as shown in the diagram.
  2. Slide the Wire Guide Holder back inside the connector cone.
  3. Screw in the Wire Brake.
How To Maintain Your TOUGH GUN Robotic Water-Cooled MIG Gun Equipped with Wire Brake

Exploded View and Parts Guide

+ Click to enlarge

How To Maintain Your TOUGH GUN Robotic Water-Cooled MIG Gun Equipped with Wire Brake, IMAGE 2
ItemDescriptionartT Number
1Nozzle Assembly451-x-xx
1ANozzle Assembly401-x-xx
2Heavy Duty Contact Tip403-1-xx
2A TOUGH LOCK® Heavy Duty Contact Tip403-20-xx
3Water Cooled Retaining Head Assembly454-1
3ATOUGH LOCK Water-Cooled Retaining Head Assembly404-30
4Water-Cooled Neck Assembly495-xx
4ATOUGH LOCK Water-Cooled Neck Assembly494-xx
5Wire Brake Assembly (see chart below)WB-xxx
5AWire Brake499
5BWire Guide HolderSee Below Chart
6Front House Assembly497
7Blue Water Line656-15
8Conduit Lube657-15
9Power Cable Assembly659-xx
10Water-Cooled Outer Jacket663-1-15
11Water Line Universal Adaptor Assembly664-400
12Power Pin Insulator664-6
13Handle Assembly666-10
14Rear Housing Assembly416-15
15Power Pin Quick-Connect214
16Liner Assembly415-xx-xx
17Water Line (OUT) – 20″ Long (Blue)658-1
18Water Line (IN) – 20″ Long (Red)658
19Oetiker Clamp (9.5 mm)656-1
20Wire Brake Tool450-17
21Oetiker Clamp (11.3 mm)413-5
22Air Tube499-9-15
23Jump Liner (see chart below)495-18-xxx
24Gun Mount for Wire BrakeAS-49-00-XW
25Power Pin Insulator414-400-30

Part Number Chart for Items 5, 5B, and 23

Item 5Item 5BItem 23Wire Size
WB-100498495-18-350.045″
WB-110498-116495-18-1160.052″ – 1/16″

Back to top

INS028 REV 11/05