PRODUCT CHANGE — TOUGH LOCK™ Retaining Head O-Ring Color Change
July 7, 2022
The o-ring used in select TOUGH LOCK retaining heads has changed. The functionality and design will remain the same, the only noticeable change is a slight variation in the color, transitioning to a darker shade of green.
All orders shipped after June 27, 2022 will be assembled with the new o-ring.
The following retaining heads are affected by the change:
| Part Number | Description |
|---|---|
| 404-30 | TOUGH LOCK retaining head for robotic applications; heavy duty, single taper, qty: 100 |
| 404-30-25 | TOUGH LOCK retaining head for robotic applications; heavy duty, single taper, qty: 25 |
| 404-31 | TOUGH LOCK retaining head, HD contact tips, qty: 100 |
| 404-31-25 | TOUGH LOCK retaining head, HD contact tips, qty: 25 |
| 404-61-25 | TOUGH LOCK retaining head, tight radius, qty: 25 |
For complete product information, refer to TOUGH LOCK consumables
PRODUCT UPDATE – AccuLock™ S Power Pin Cap Design Change
PRODUCT UPDATE — AccuLock™ S Power Pin Cap Design Change
The design of all AccuLock S power pin caps will be updated to allow retention of AccuLock S liners with a set screw instead of a rubber washer. This running change impacts Bernard® BTB MIG guns. It takes place on March 17, 2022.
All BTB MIG guns configured with AccuLock S consumables ordered and/or built after March 17, 2022 will include the new set screw. The same can be said for orders placed for replacement AccuLock S power pin caps.
Additional changes include:
- Each size of AccuLock S power pin cap will have a visible gas sealing washer that is color matched to compatible liner shrink tube
- Wire size compatibility will change for two AccuLock S liners:
| Liner Part Number | Former Wire Size Compatibility | New Wire Size Compatibility |
|---|---|---|
| LA6A-XX | 5/64″ (2.0 mm) – 3/32″ (2.4 mm) | 5/64″ (2.0 mm) |
| LA7A-XX | 3/32″ (2.4 mm) – 7/64″ (2.8 mm) | 3/32″ (2.4 mm) |
- A new Euro power pin option (a two-piece assembly comprised of power pin and pass-through gun connector) will be offered when configuring Bernard BTB MIG guns with AccuLock S Consumables.
New design advantages include easier power pin cap installation, improved liner retention and simpler identification of compatible parts.
Additional considerations:
- No change to how Bernard BTB MIG guns configured with AccuLock S consumables are ordered
- T-handle hex wrench included with every Bernard BTB MIG gun configured with AccuLock S consumables
- Extra set screw included with every Acculock S liner, can also be ordered separately
- No change to the way Miller® MDX™ gun liners are retained at this time
For more information, refer to the AccuLock S consumables spec sheet. Additional how-to videos can also be found on Tregaskiss.com/AccuLock S.
NEW PRODUCT — TOUGH GUN TT4A and TT4E Reamer Nozzle Cleaning Stations
September 1, 2021
NEW PRODUCT — TOUGH GUN® TT4A and TT4E Nozzle Cleaning Stations
We are pleased to announce the launch of the new TOUGH GUN® TT4A and TT4E reamer nozzle cleaning stations. Tregaskiss has enhanced the trusted dependability of our existing TOUGH GUN TT3 and TT3E reamers with superior performance, high durability components and new standard features. With increased uptime and weld quality, you’ll spend less time maintaining and troubleshooting your robotic welding equipment and more time getting product out the door.
These new reamers power through the toughest spatter with a .95HP motor and 236 lbs. of spindle lifting force at 95 psi. Their higher durability components help to keep your welding operation up and running for extended periods of time:
- Powerful, lubricated motor lasts up to 18M cycles at 80+ psi
- Durable valves and cylinders rated for 10M+ cycles
- Wire cutter can run 1M+ cycles without requiring maintenance
Now included as standard are new features that help reduce downtime, safety incidents and costly weld defects related to anti-spatter:
- A new anti-spatter reservoir with increased fluid capacity;
- A new low fluid level indicator that sends a signal to the PLC / robot when anti-spatter is running low; and
- A new spray containment unit that reduces risk of slip / trip hazards due to overspray contamination.
Discontinuation of TOUGH GUN® TT3 / TT3E Reamers
Tregaskiss will discontinue the sales of the TT3 and TT3E reamers beginning 09/01/2021. However, we will continue to offer TT3 / TT3E replacement parts for a period of five years (until 2026).
For assistance with converting your existing part number, please use our TOUGH GUN TT3 reamer online part number conversion tool.
If you have questions regarding your TT3 / TT3E reamer replacement parts, please contact our Customer Service team from 7:00 a.m. to 4:30 p.m. CST Monday through Friday:
Phone: 1-855-MIGWELD (644-9353) –
Email: cs@itwmig.com
DISCONTINUED PRODUCTS — Select Elliptical Contact Tips
DISCONTINUED PRODUCTS — Select Elliptical Contact Tips
July 14, 2021
Effective June 30, 2021 (or when inventory is depleted), we will be discontinuing six (6) extremely low volume elliptical contact tips as part of an ongoing effort to improve our product offering and reduce complexity.
| Part Number | Description |
|---|---|
| 1597 | Contact tip, elliptical, 1500 series, 0.023″ (0.6 mm) |
| 1594 | Contact tip, elliptical, 1500 series, 7/64″ (2.8 mm) |
| 1595 | Contact tip, elliptical, 1500 series, 1/8″ (3.2mm) |
| 7494 | Contact tip, elliptical, 7400 series, 7/64″ (2.8 mm) |
| 243 | Contact tip, elliptical, Pipeline, 0.030″ – 0.0.35″ (0.8 – 0.9 mm) |
| 244 | Contact tip, elliptical, Pipeline 0.045″ (1.2 mm) |
We recommend replacing these contact tips with compatible components from our complete lineup of AccuLock™ consumables: choose from AccuLock R or AccuLock S consumables, depending on product converted.
Please contact the Bernard and Tregaskiss Customer Service team by phone at 1.866.MIGWELD (644.9353) or email at cs@itwmig.com for assistance making the appropriate replacement.
PRODUCT UPDATE – Tregaskiss BA1 Cobot MIG Gun Online Configurator
PRODUCT UPDATE – Tregaskiss® BA1 Cobot MIG Gun Online Configurator
May 3, 2021
Today we launched our new online configurator and reverse lookup for the BA1 cobot air-cooled MIG gun!
This new mobile-friendly online configurator allows you to build a gun part number for an entire cobot system or just the MIG gun. You can also input an already configured gun part number into the reverse lookup tool to easily access replacement parts information.
Both the configurator and reverse lookup tool provide access to a detailed replacement parts list with diagram and additional resources such as spec sheets, owner’s manual and more. Resources can be printed, saved in PDF format, or shared via email.
Visit the Configure My Gun page for other product online configurators.
PRODUCT UPDATES — Select AccuLock™ Contact Tips and Diffusers Now Available in Quantities of 100 and 1000
PRODUCT UPDATES — Select AccuLock™ Contact Tips and Diffusers Now Available in Quantities of 100 and 1000
For the convenience of our customers, the most popular sizes of our copper AccuLock contact tips and AccuLock R diffusers are now available in larger quantity packaging.
Please reference the new part numbers in the chart below:
| New 100 Pack Contact Tip Part Numbers | New 1000 Pack Contact Tip Part Numbers | New 100 Pack Diffuser Part Numbers |
|---|---|---|
| T-A030CH-100 | T-A030CH-1000 | D-ATTH-100 |
| T-A035CH-100 | T-A035CH-1000 | D-ATSH-100 |
| T-A039CH-100 | T-A039CH-1000 | — |
| T-A045CH-100 | T-A045CH-1000 | — |
| T-A052CH-100 | T-A052CH-1000 | — |
| T-A062CH-100 | — | — |
| T-A072CH-100 | — | — |
| T-A078CH-100 | — | — |
| T-A094CH-100 | — | — |
For more information, refer to the AccuLock S consumables or AccuLock R consumables spec sheets.
NEW PRODUCT – Tregaskiss® BA1 Cobot Air-Cooled MIG Gun
NEW PRODUCT – Tregaskiss® BA1 Cobot Air-Cooled MIG Gun
March 31, 2021
We are pleased to announce the launch of the Tregaskiss BA1 cobot air-cooled MIG gun.
Tregaskiss has incorporated its well-known and dependable performance into the new BA1 cobot MIG gun. The gun’s simple and durable design helps operators stay focused on welding, not troubleshooting, to help increase uptime and throughput.
Tregaskiss delivers the BA1 cobot MIG gun fully assembled, including AccuLock™ R consumables. The optional free drive button can seamlessly communicate with your cobot and is simple to install via a single plug. This, along with minimal fasteners and a precision-machined keyway mounting system, make installation of the gun and mounting arm quick, easy and accurate.
Designed for increased tip life, AccuLock consumables virtually eliminates contact tip cross-threading issues. Helping minimize downtime, improve weld quality and further drive productivity.
AccuLock consumables are part of a Common Consumables Platform™ and are compatible with Bernard® semi-automatic MIG guns, and Tregaskiss fixed automatic and robotic MIG guns.
Download the new BA1 Spec Sheet
DISCONTINUED PRODUCT — ACC and ACD Series Automatic Air-Cooled MIG Guns
DISCONTINUED PRODUCTS – ACC and ACD Series Automatic Air-Cooled MIG Guns
February 26, 2021
Tregaskiss® will discontinue the sales of ACC and ACD series automatic air-cooled MIG guns (formerly branded Bernard®) and parts as of August 31, 2021. These are in addition to the ACA and ACB series that were discontinued in January.
Click here for a list of affected part numbers
Replacement Gun Option
Tregaskiss MA1 Fixed Automatic Air-Cooled MIG Guns are available as replacements.
Please reach out to your ITW Welding sales representative for assistance.
If you have any questions regarding these changes, please kindly contact your local representative.
PACKAGING CHANGES — Changes to TOUGH GARD Anti-Spatter Liquid Containers
PACKAGING CHANGES — Changes to
TOUGH GARD Anti-Spatter Liquid Containers
January 26, 2021
Customers will begin to notice Tregaskiss® TOUGH GARD® anti-spatter liquid packaging is arriving in different containers. This is because we recently refreshed the design and labeling of these containers, but no change was made to the TOUGH GARD anti-spatter liquid product.
The 5-Gallon and 55-Gallon containers remain compatible with the TOUGH GARD anti-spatter multi-feed system.
Affected Part Numbers:
| TG-101-55 | 55 U.S. Gal. / 208 L | No change to container volume |
| TG-101-05 | 5.28 U.S. Gal. / 20 L | Formerly 5 U.S. Gal. / 18.92 L |
| TG-101-01 | 1 U.S. Gal. / 3.78 L | No change to container volume |
| TG-101-32SP | 32 fl. oz. / 946 mL | Formerly 25.36 fl. oz. / 750 mL |
| TG-101-14S | 16.9 fl. oz. / 500 mL | No change to container volume |
TG-101-55
TG-101-01
TG-101-14S
TG-101-05
TG-101-32SP
Learn more about TOUGH GARD anti-spatter liquid or the TOUGH GARD anti-spatter multi-feed system.
PRODUCT UPDATE — Select AccuLock Heavy Duty (HD) Copper Contact Tips Now Available in Packages of 1000
PRODUCT UPDATE — Select AccuLock Heavy Duty (HD) Copper Contact Tips Now Available in Quantities of 1000
AccuLock™ contact tips for 0.030” (0.8 mm) to 0.052” (1.4 mm) wire sizes are now available in packages of 1000.
Affected Part Numbers:
| T-A030CH-1000 | 0.030″ (0.8 mm) |
| T-A035CH-1000 | 0.035″ (0.9 mm) |
| T-A039CH-1000 | 0.039″ (1.0 mm) |
| T-A045CH-1000 | 0.045″ (1.2 mm) |
| T-A052CH-1000 | 0.052″ (1.4 mm) |
AccuLock contact tips increase consumable life, reduce consumable replacement errors, simply consumables replacement and can be used across all semi-automatic, robotic and fixed automatic MIG guns.
DISCONTINUED PRODUCTS — Various Part Numbers
DISCONTINUED PRODUCTS — Various Part Numbers
October 23, 2020
Effective December 31, 2020, we will be discontinuing a variety of part numbers due to low demand and sales volume. A majority of these items are configured MIG gun part numbers and special products.
Please refer to the appendix for the list of affected part numbers.
PRODUCT UPDATE — Tregaskiss® 600 amp Robotic Water-Cooled MIG Guns Now Available With AccuLock™ R Consumables
PRODUCT UPDATE — Tregaskiss® 600 amp Robotic Water-Cooled MIG Guns Now Available With AccuLock™ R Consumables
September 23, 2020
We are proud to announce new AccuLock R consumables are now available for Tregaskiss 600 amp robotic water-cooled MIG guns. Convert your existing gun from TOUGH LOCK® to AccuLock R consumables with no impact to Tool Center Point (TCP), or configure your new Tregaskiss 600 amp robotic water-cooled MIG gun with AccuLock R consumables today!
The 600 amp robotic water-cooled MIG gun is ready to take on your most demanding welding applications. Its rugged design is tough and dependable enough to maximize productivity when welding thick plate or running prolonged duty cycles.
AccuLock R consumables are designed for increased tip life, and virtually eliminate contact tip cross-threading issues to help reduce both your planned and unplanned downtime.
Spec Sheet: English
PRODUCT UPDATE — Tregaskiss Fixed Automatic Series MIG Guns
PRODUCT UPDATE — Tregaskiss Fixed Automatic Series MIG Guns
September 23, 2020
Tregaskiss is pleased to announce updates to our fixed automatic series MIG guns:
Now available with AccuLock R consumables
AccuLock™ R consumables are designed for increased tip life, and virtually eliminate contact tip cross-threading issues to help reduce both your planned and unplanned downtime.
New Online Configurators and Reverse Lookup Tools
Customers can configure all fixed automatic MIG guns to required specifications or reverse lookup existing gun part numbers.
Part number change to MW1 fixed automatic water-cooled MIG guns
Tregaskiss® MW1 fixed automatic water-cooled MIG gun part numbers have been changed from the 46 and 64 series part numbering convention. Customers can look up legacy part numbers using the new Tregaskiss MW1 MIG gun part number conversion tool.
New Spec Sheets
Get more information for all consumables and replacement parts for your Tregaskiss fixed automatic MIG guns:
- SP-MA1 | Tregaskiss MA1 fixed automatic air-cooled MIG guns spec sheet
- SP-MW1 | Tregaskiss MW1 fixed automatic water-cooled MIG guns spec sheet
- SP-AW2 | Tregaskiss AW2 fixed automatic water-cooled MIG guns spec sheet
Learn more about our fixed automatic MIG guns or AccuLock R consumables.
PACKAGING CHANGE — Formatting Changes to Owner’s Manuals
PACKAGING CHANGES —
Formatting Changes to Owner’s Manuals
August 18, 2020
Customers may notice that some Tregaskiss® and Bernard® MIG welding product owner’s manuals look different than previous versions. This is because we recently refreshed the design and format of these product manuals, but their contents remain the same. No changes to the important installation, maintenance, troubleshooting, parts lists and other information and instructions have been made.
Bernard Owner’s Manuals
Tregaskiss Owner’s Manuals
The most current version of these newly formatted owner’s manuals, along with other product manuals and spec sheets, are available for download from our website from the respective product pages as well as the Spec Sheets and Owner’s Manuals page.
Printed inventory will be replaced as a running change.
DISCONTINUED PRODUCT — ACA and ACB Series Automatic Air-Cooled MIG Guns
DISCONTINUED PRODUCTS – ACA and ACB Series Automatic Air-Cooled MIG Guns
August 12, 2020
Tregaskiss will discontinue the sales of ACA and ACB series automatic air-cooled MIG guns (formerly branded Bernard®) and parts as of January 31, 2021.
Click here for a list of affected part numbers
Replacement Gun Option
Tregaskiss® Auto Head Fixed Automatic Air-Cooled MIG Guns are available as replacements.
Please reach out to your ITW Welding sales representative for assistance.
If you have any questions regarding these changes, please kindly contact your local representative.
Learn more about our Tregaskiss Fixed Automatic MIG Guns
NEW PRODUCT – Expanded AccuLock™ S Power Pin Offering
NEW PRODUCT – Expanded AccuLock™ S Power Pin Offering
August 11, 2020
We are pleased to announce that the AccuLock S consumables system has been expanded to include new Lincoln®, Tweco® #4 and Tweco® #5 AccuLock S power pins. These three new power pins are also configurable options in our online BTB MIG gun configurator.
Part Numbers
| Feeder Manufacturer | AccuLock S Power Pin | AccuLock S Power Pin Cap | AccuLock S Power Pin Cap | AccuLock S Power Pin Cap |
|---|---|---|---|---|
| 0.023″-0.030″ | 0.030″-0.045″ | 0.045″-3/32″ | ||
| Lincoln® | 2200210 | 2200192 | 2200193 | 2200212 |
| Tweco® #4 | 2200150 | 2200183 | 2200184 | 2200209 |
| Tweco® #5 | 2200157 | 2200186 | 2200187 | 2200208 |
The AccuLock S consumables system is designed to address liner trim length errors and erratic wire feeding. The AccuLock S liner is locked and concentrically aligned to both the contact tip and the power pin without the use of fasteners, which provides a flawless wire-feed path that guarantees smooth, uninterrupted delivery of the wire to the weld puddle. Plus, the liner replacement process has been error-proofed so you can trim your liner accurately and easily every time, with no measuring.
Important Note:
The AccuLock S consumables system requires all AccuLock components: contact tip, diffuser, nozzle, liner, neck insulator, power pin and power pin cap.
Reduce troubleshooting, production downtime and rework with AccuLock S Consumables.
PRODUCT CHANGE — Changes to Crimping on Select Nozzles
PRODUCT CHANGE — Changes to Crimping on Select Nozzles
August 4, 2020
Effective immediately, you may notice a slight change to the crimp area of some Tregaskiss® nozzles. Within our manufacturing process, we have begun to transition from six-jaw to eight-jaw crimpers. Rest assured that the durability and performance of Tregaskiss nozzles will remain the same.
The only difference you will notice is a slight change limited to the crimp area of the nozzle. The difference is shown below:
Timeline for Transitioning to Eight-Jaw Crimpers
(Actual ship dates will be dependent upon existing inventory levels at time of assembly transition)
- July 2020: This transition has already begun on part number 401-6-62, with additional part numbers to follow
- August 2020: All heavy duty (HD) Tregaskiss nozzles will transition to the new style crimp and will be completed by August 31
- September 2020: All standard duty (SD) Tregaskiss nozzles will transition to the new style crimp and will be completed by September 30
For complete product information:
AccuLock™ R Consumables
TOUGH LOCK® Consumables
DISCONTINUED PRODUCT – TOUGH GUN G2 and ThruArm G2 Series MIG Guns
DISCONTINUED PRODUCT –
TOUGH GUN G2 and ThruArm G2 Series Robotic Air-Cooled MIG Guns
December 1, 2017
As of December 29, 2017, all TOUGH GUN® G2 and ThruArm® G2 series robotic air-cooled MIG guns will be discontinued as they are being replaced by TOUGH GUN CA3 and TOUGH GUN TA3 robotic air-cooled MIG guns. The TOUGH GUN G2 and ThruArm G2 series product lines will be fully supported with replacement parts (necks, cables, gun modules) until the end of 2018.
Affected Part Numbers:
- All MIG gun part numbers beginning with RA2
- All MIG gun part numbers beginning with TA2
- All MIG gun part numbers beginning with SG59
Download PDF Archived Tech Guides:
- M074 TOUGH GUN G2 Series
- M080 TOUGH GUN ThruArm G2 Series
- M084 TOUGH GUN ThruArm G2 Series for FANUC® Robots
- M085 Technical Addendum for TOUGH GUN ThruArm G2 Series TOUGH GUN I.C.E.® Neck Installation for Motoman® Robots
Download PDF Archived Technical Inserts:
- INS070 Wire Brake Installation for TOUGH GUN G2 Series MIG Guns
- INS072 TOUGH GUN G2 Series TOUGH GUN I.C.E. Installation for KUKA® Robots
- INS091 TOUGH GUN ThruArm MIG Gun Installation
Download PDF Archived Configurator Spreads
- TOUGH GUN G2 Series MIG Gun Configurator Spread
- TOUGH GUN ThruArm G2 Series MIG Gun Configurator Spread
November 11, 2019 In September 2017, Tregaskiss entered into a Master Distribution Agreement with DINSE GmbH to provide best-in-class robotic water-cooled MIG guns to the North American market under the Tregaskiss® by DINSE™ brand name. After many discussions between Tregaskiss and DINSE, we have made an amicable and mutual decision to end our business relationship. This notice is to officially announce that Tregaskiss will discontinue sales of Tregaskiss® by DINSE™ Robotic Water-Cooled MIG Guns, parts and consumables as of April 30, 2020. Until that termination date, Tregaskiss will not accept orders from new customers but will continue to provide product to support existing customers. Details of affected part numbers can be accessed here. When current Tregaskiss by DINSE Robotic Water-Cooled MIG Guns eventually require replacement, end users have two options: After April 30, 2020, please obtain all replacement parts and consumables from the relevant manufacturer. Please contact your local representative with any questions regarding these changes.
April 3, 2020 Tregaskiss is proud to announce the addition of two new nozzles to the AccuLock™ R consumables offering. Only slightly larger than 1/2″ bore nozzles, these 5/8″ bore nozzles offer almost the same weld access while still providing the clearance needed for reliable gas flow and reaming to the gas holes. These new nozzles are also now configurable on TOUGH GUN® TA3 and CA3 robotic air-cooled MIG guns. Learn more about AccuLock R consumables, or configure your robotic MIG gun online.
February 14, 2020 Tregaskiss® and Bernard® branded nozzles are currently packaged in a variety of bag sizes and styles. We will begin standardizing on a single size and style bag for all Tregaskiss and Bernard nozzles over the coming months as a running change that takes place as existing inventory is depleted. 5″ x 8″ (white) 8″ x 10″ (white) 6″ x 8″ (clear) 8″ x 10″ (white) (subject to change depending on volume changes)
December 2, 2019 Effective November 15, 2019, the TOUGH GUN® TT3E (Ethernet) reamer is now running updated firmware and software. The ARGEE software has been updated from version 4.0 to 4.1, and the firmware from version 3.5 to 3.6. For more information or to access software files, please visit the TOUGH GUN TT3E reamer webpage.
October 23, 2019 Tregaskiss is pleased to announce the launch of new AccuLock™ R consumables, a system designed to maximize throughput and efficiency with minimal risk and effort. AccuLock contact tips last longer and are virtually impossible to cross-thread. The long contact tip tail concentrically aligns the tip within the diffuser prior to thread engagement, and this coupled with the tip’s coarse thread ensures quick, accurate replacement without cross-threading. An upgrade to AccuLock HDP contact tips can extend life by 10x or more in pulse welding applications. You can easily switch from TOUGH LOCK® and other consumables to AccuLock R consumables with no impact to tool center point (TCP), making this upgrade low effort, low risk, and high payoff. Plus, Tregaskiss AccuLock R consumables and Bernard® AccuLock S consumables share a common contact tip, so you can benefit from the reduced costs and simplified inventory of a common consumable platform™ if you have a combination of robotic and semi-automatic MIG guns in your facility. Reduce troubleshooting, downtime and rework with these new consumables. Learn more about Tregaskiss® AccuLock™ R consumables.
August 20, 2019 Effective immediately, a new, enhanced AccuLock™ S power pin is now available for Miller® equipment. This new power pin is designed specifically for use with the new Bernard® AccuLock S consumable system to optimize performance. Load and Lock for Better Productivity Learn more about AccuLock S consumables.
DISCONTINUED PRODUCT – Tregaskiss by DINSE Robotic Water-Cooled MIG Guns
DISCONTINUED PRODUCTS –
Tregaskiss by DINSE Robotic Water-Cooled MIG GunsReplacement MIG Gun Options
Parts and Consumables
NEW PRODUCT – Tregaskiss Nozzles for AccuLock R Consumables
NEW PRODUCT —
Tregaskiss Nozzles for AccuLock R ConsumablesPart Numbers
PACKAGING CHANGE – Changes to Tregaskiss and Bernard Nozzle Bag Packaging
PACKAGING CHANGE –
Changes to Tregaskiss and Bernard Nozzle Bag Packaging
Current Bag Sizes and Styles:
New Bag Size and Style:
Transition Timeline
PRODUCT UPDATE – Firmware and Software Update for the TOUGH GUN TT3E Reamer
PRODUCT UPDATE —
Firmware and Software Update for the TOUGH GUN TT3E ReamerWhat’s New?
Compatibility
Downloads
NEW PRODUCT – AccuLock R Consumables
NEW PRODUCT – AccuLock R Consumables
Series Components:
PRODUCT CHANGE – AccuLock S Power Pins for Miller Equipment
PRODUCT CHANGE –
New AccuLock S Power Pins for Miller Equipment
If your power pin has a large ID, please contact Customer Service to get the new AccuLock S Power Pin.
NEW (Shown Right) AccuLock S Power Pin Design
Torque to 10 ft-lbs / 120 in-lbs (13.5 Nm)Affected Part Numbers
2200137 Has been replaced by 2200206 and 2200207 in the AccuLock S consumables system as noted directly following 2200206 Replaces 2200137 for wire sizes 0.023″ (0.6 mm) – 5/64″ (2.0 mm) 2200207 Replaces 2200137 for wire sizes 3/32″ (2.4 mm) – 1/8″ (3.2 mm)
AccuLock S Consumables
