NEW PRODUCT — ACCULOCK S FOR CONVENTIONAL LINER STARTER KIT — NOW AVAILABLE
The AccuLock™ S for Conventional Liners starter kit (part number: ALCSK-1) is designed to help welders convert from their current BTB MIG gun consumables to AccuLock™ S consumables.
The kit contains everything needed for welders to swap their current nozzle, diffuser and contact tip with AccuLock™ S consumables with the ability to still use their existing conventional liner.
PRODUCT CHANGE — AccuLock™ Conventional Liner Gas Diffusers
PRODUCT CHANGE — AccuLock™ S Conventional Liner Gas Diffusers — O-Ring Color Change to Gray
All AccuLock S conventional liner gas diffusers began shipping with a gray o-ring instead of a black o-ring on February 22, 2023. The gray o-ring makes it easier to tell the difference between an AccuLock S dual-locked liner gas diffuser and an AccuLock S conventional liner gas diffuser.
For reference, the AccuLock gas diffuser part numbers listed below will be assembled with a gray o-ring:
| Part Number | Description |
| D-A1-C | AccuLock S Gas Diffuser, Large Nozzle, Thread-On, Conventional Liner |
| D-A2-C | AccuLock S Gas Diffuser, Large Nozzle, Slip-On, Conventional Liner |
| DS-A1-C | AccuLock S Gas Diffuser, Small Nozzle, Thread-On, Conventional Liner |
| DS-A2-C | AccuLock S Gas Diffuser, Small Nozzle, Slip-On, Conventional Liner |
PRODUCT CHANGE — TOUGH LOCK™ Retaining Head O-Ring Color Change
PRODUCT CHANGE — TOUGH LOCK™ Retaining Head O-Ring Color Change
July 7, 2022
The o-ring used in select TOUGH LOCK retaining heads has changed. The functionality and design will remain the same, the only noticeable change is a slight variation in the color, transitioning to a darker shade of green.
All orders shipped after June 27, 2022 will be assembled with the new o-ring.
The following retaining heads are affected by the change:
| Part Number | Description |
|---|---|
| 404-30 | TOUGH LOCK retaining head for robotic applications; heavy duty, single taper, qty: 100 |
| 404-30-25 | TOUGH LOCK retaining head for robotic applications; heavy duty, single taper, qty: 25 |
| 404-31 | TOUGH LOCK retaining head, HD contact tips, qty: 100 |
| 404-31-25 | TOUGH LOCK retaining head, HD contact tips, qty: 25 |
| 404-61-25 | TOUGH LOCK retaining head, tight radius, qty: 25 |
For complete product information, refer to TOUGH LOCK consumables
PRODUCT UPDATE – AccuLock™ S Power Pin Cap Design Change
PRODUCT UPDATE — AccuLock™ S Power Pin Cap Design Change
The design of all AccuLock S power pin caps will be updated to allow retention of AccuLock S liners with a set screw instead of a rubber washer. This running change impacts Bernard® BTB MIG guns. It takes place on March 17, 2022.
All BTB MIG guns configured with AccuLock S consumables ordered and/or built after March 17, 2022 will include the new set screw. The same can be said for orders placed for replacement AccuLock S power pin caps.
Additional changes include:
- Each size of AccuLock S power pin cap will have a visible gas sealing washer that is color matched to compatible liner shrink tube
- Wire size compatibility will change for two AccuLock S liners:
| Liner Part Number | Former Wire Size Compatibility | New Wire Size Compatibility |
|---|---|---|
| LA6A-XX | 5/64″ (2.0 mm) – 3/32″ (2.4 mm) | 5/64″ (2.0 mm) |
| LA7A-XX | 3/32″ (2.4 mm) – 7/64″ (2.8 mm) | 3/32″ (2.4 mm) |
- A new Euro power pin option (a two-piece assembly comprised of power pin and pass-through gun connector) will be offered when configuring Bernard BTB MIG guns with AccuLock S Consumables.
New design advantages include easier power pin cap installation, improved liner retention and simpler identification of compatible parts.
Additional considerations:
- No change to how Bernard BTB MIG guns configured with AccuLock S consumables are ordered
- T-handle hex wrench included with every Bernard BTB MIG gun configured with AccuLock S consumables
- Extra set screw included with every Acculock S liner, can also be ordered separately
- No change to the way Miller® MDX™ gun liners are retained at this time
For more information, refer to the AccuLock S consumables spec sheet. Additional how-to videos can also be found on Tregaskiss.com/AccuLock S.
DISCONTINUED PRODUCTS — Select Elliptical Contact Tips
DISCONTINUED PRODUCTS — Select Elliptical Contact Tips
July 14, 2021
Effective June 30, 2021 (or when inventory is depleted), we will be discontinuing six (6) extremely low volume elliptical contact tips as part of an ongoing effort to improve our product offering and reduce complexity.
| Part Number | Description |
|---|---|
| 1597 | Contact tip, elliptical, 1500 series, 0.023″ (0.6 mm) |
| 1594 | Contact tip, elliptical, 1500 series, 7/64″ (2.8 mm) |
| 1595 | Contact tip, elliptical, 1500 series, 1/8″ (3.2mm) |
| 7494 | Contact tip, elliptical, 7400 series, 7/64″ (2.8 mm) |
| 243 | Contact tip, elliptical, Pipeline, 0.030″ – 0.0.35″ (0.8 – 0.9 mm) |
| 244 | Contact tip, elliptical, Pipeline 0.045″ (1.2 mm) |
We recommend replacing these contact tips with compatible components from our complete lineup of AccuLock™ consumables: choose from AccuLock R or AccuLock S consumables, depending on product converted.
Please contact the Bernard and Tregaskiss Customer Service team by phone at 1.866.MIGWELD (644.9353) or email at cs@itwmig.com for assistance making the appropriate replacement.
PRODUCT UPDATES — Select AccuLock™ Contact Tips and Diffusers Now Available in Quantities of 100 and 1000
PRODUCT UPDATES — Select AccuLock™ Contact Tips and Diffusers Now Available in Quantities of 100 and 1000
For the convenience of our customers, the most popular sizes of our copper AccuLock contact tips and AccuLock R diffusers are now available in larger quantity packaging.
Please reference the new part numbers in the chart below:
| New 100 Pack Contact Tip Part Numbers | New 1000 Pack Contact Tip Part Numbers | New 100 Pack Diffuser Part Numbers |
|---|---|---|
| T-A030CH-100 | T-A030CH-1000 | D-ATTH-100 |
| T-A035CH-100 | T-A035CH-1000 | D-ATSH-100 |
| T-A039CH-100 | T-A039CH-1000 | — |
| T-A045CH-100 | T-A045CH-1000 | — |
| T-A052CH-100 | T-A052CH-1000 | — |
| T-A062CH-100 | — | — |
| T-A072CH-100 | — | — |
| T-A078CH-100 | — | — |
| T-A094CH-100 | — | — |
For more information, refer to the AccuLock S consumables or AccuLock R consumables spec sheets.
PRODUCT UPDATE — Select AccuLock Heavy Duty (HD) Copper Contact Tips Now Available in Packages of 1000
PRODUCT UPDATE — Select AccuLock Heavy Duty (HD) Copper Contact Tips Now Available in Quantities of 1000
AccuLock™ contact tips for 0.030” (0.8 mm) to 0.052” (1.4 mm) wire sizes are now available in packages of 1000.
Affected Part Numbers:
| T-A030CH-1000 | 0.030″ (0.8 mm) |
| T-A035CH-1000 | 0.035″ (0.9 mm) |
| T-A039CH-1000 | 0.039″ (1.0 mm) |
| T-A045CH-1000 | 0.045″ (1.2 mm) |
| T-A052CH-1000 | 0.052″ (1.4 mm) |
AccuLock contact tips increase consumable life, reduce consumable replacement errors, simply consumables replacement and can be used across all semi-automatic, robotic and fixed automatic MIG guns.
DISCONTINUED PRODUCTS — Various Part Numbers
DISCONTINUED PRODUCTS — Various Part Numbers
October 23, 2020
Effective December 31, 2020, we will be discontinuing a variety of part numbers due to low demand and sales volume. A majority of these items are configured MIG gun part numbers and special products.
Please refer to the appendix for the list of affected part numbers.
PRODUCT UPDATE — Tregaskiss® 600 amp Robotic Water-Cooled MIG Guns Now Available With AccuLock™ R Consumables
PRODUCT UPDATE — Tregaskiss® 600 amp Robotic Water-Cooled MIG Guns Now Available With AccuLock™ R Consumables
September 23, 2020
We are proud to announce new AccuLock R consumables are now available for Tregaskiss 600 amp robotic water-cooled MIG guns. Convert your existing gun from TOUGH LOCK® to AccuLock R consumables with no impact to Tool Center Point (TCP), or configure your new Tregaskiss 600 amp robotic water-cooled MIG gun with AccuLock R consumables today!
The 600 amp robotic water-cooled MIG gun is ready to take on your most demanding welding applications. Its rugged design is tough and dependable enough to maximize productivity when welding thick plate or running prolonged duty cycles.
AccuLock R consumables are designed for increased tip life, and virtually eliminate contact tip cross-threading issues to help reduce both your planned and unplanned downtime.
Spec Sheet: English
PACKAGING CHANGE — Formatting Changes to Owner’s Manuals
PACKAGING CHANGES —
Formatting Changes to Owner’s Manuals
August 18, 2020
Customers may notice that some Tregaskiss® and Bernard® MIG welding product owner’s manuals look different than previous versions. This is because we recently refreshed the design and format of these product manuals, but their contents remain the same. No changes to the important installation, maintenance, troubleshooting, parts lists and other information and instructions have been made.
Bernard Owner’s Manuals
Tregaskiss Owner’s Manuals
The most current version of these newly formatted owner’s manuals, along with other product manuals and spec sheets, are available for download from our website from the respective product pages as well as the Spec Sheets and Owner’s Manuals page.
Printed inventory will be replaced as a running change.
NEW PRODUCT – Expanded AccuLock™ S Power Pin Offering
NEW PRODUCT – Expanded AccuLock™ S Power Pin Offering
August 11, 2020
We are pleased to announce that the AccuLock S consumables system has been expanded to include new Lincoln®, Tweco® #4 and Tweco® #5 AccuLock S power pins. These three new power pins are also configurable options in our online BTB MIG gun configurator.
Part Numbers
| Feeder Manufacturer | AccuLock S Power Pin | AccuLock S Power Pin Cap | AccuLock S Power Pin Cap | AccuLock S Power Pin Cap |
|---|---|---|---|---|
| 0.023″-0.030″ | 0.030″-0.045″ | 0.045″-3/32″ | ||
| Lincoln® | 2200210 | 2200192 | 2200193 | 2200212 |
| Tweco® #4 | 2200150 | 2200183 | 2200184 | 2200209 |
| Tweco® #5 | 2200157 | 2200186 | 2200187 | 2200208 |
The AccuLock S consumables system is designed to address liner trim length errors and erratic wire feeding. The AccuLock S liner is locked and concentrically aligned to both the contact tip and the power pin without the use of fasteners, which provides a flawless wire-feed path that guarantees smooth, uninterrupted delivery of the wire to the weld puddle. Plus, the liner replacement process has been error-proofed so you can trim your liner accurately and easily every time, with no measuring.
Important Note:
The AccuLock S consumables system requires all AccuLock components: contact tip, diffuser, nozzle, liner, neck insulator, power pin and power pin cap.
Reduce troubleshooting, production downtime and rework with AccuLock S Consumables.
PRODUCT CHANGE — Changes to Crimping on Select Nozzles
PRODUCT CHANGE — Changes to Crimping on Select Nozzles
August 4, 2020
Effective immediately, you may notice a slight change to the crimp area of some Tregaskiss® nozzles. Within our manufacturing process, we have begun to transition from six-jaw to eight-jaw crimpers. Rest assured that the durability and performance of Tregaskiss nozzles will remain the same.
The only difference you will notice is a slight change limited to the crimp area of the nozzle. The difference is shown below:
Timeline for Transitioning to Eight-Jaw Crimpers
(Actual ship dates will be dependent upon existing inventory levels at time of assembly transition)
- July 2020: This transition has already begun on part number 401-6-62, with additional part numbers to follow
- August 2020: All heavy duty (HD) Tregaskiss nozzles will transition to the new style crimp and will be completed by August 31
- September 2020: All standard duty (SD) Tregaskiss nozzles will transition to the new style crimp and will be completed by September 30
For complete product information:
AccuLock™ R Consumables
TOUGH LOCK® Consumables
NEW PRODUCT – Tregaskiss Nozzles for AccuLock R Consumables
NEW PRODUCT —
Tregaskiss Nozzles for AccuLock R Consumables
April 3, 2020
Tregaskiss is proud to announce the addition of two new nozzles to the AccuLock™ R consumables offering. Only slightly larger than 1/2″ bore nozzles, these 5/8″ bore nozzles offer almost the same weld access while still providing the clearance needed for reliable gas flow and reaming to the gas holes.
Part Numbers
- 401-30-62 – 5/8″ bore, 1/8″ stick out, brass, slip-on, 0.938″ O.D.
- 401-30-62T – 5/8″ bore, 1/8″ stick out, brass, thread-on, 0.938″ O.D.
These new nozzles are also now configurable on TOUGH GUN® TA3 and CA3 robotic air-cooled MIG guns. Learn more about AccuLock R consumables, or configure your robotic MIG gun online.
February 14, 2020 Tregaskiss® and Bernard® branded nozzles are currently packaged in a variety of bag sizes and styles. We will begin standardizing on a single size and style bag for all Tregaskiss and Bernard nozzles over the coming months as a running change that takes place as existing inventory is depleted. 5″ x 8″ (white) 8″ x 10″ (white) 6″ x 8″ (clear) 8″ x 10″ (white) (subject to change depending on volume changes)
October 23, 2019 Tregaskiss is pleased to announce the launch of new AccuLock™ R consumables, a system designed to maximize throughput and efficiency with minimal risk and effort. AccuLock contact tips last longer and are virtually impossible to cross-thread. The long contact tip tail concentrically aligns the tip within the diffuser prior to thread engagement, and this coupled with the tip’s coarse thread ensures quick, accurate replacement without cross-threading. An upgrade to AccuLock HDP contact tips can extend life by 10x or more in pulse welding applications. You can easily switch from TOUGH LOCK® and other consumables to AccuLock R consumables with no impact to tool center point (TCP), making this upgrade low effort, low risk, and high payoff. Plus, Tregaskiss AccuLock R consumables and Bernard® AccuLock S consumables share a common contact tip, so you can benefit from the reduced costs and simplified inventory of a common consumable platform™ if you have a combination of robotic and semi-automatic MIG guns in your facility. Reduce troubleshooting, downtime and rework with these new consumables. Learn more about Tregaskiss® AccuLock™ R consumables.
August 20, 2019 Effective immediately, a new, enhanced AccuLock™ S power pin is now available for Miller® equipment. This new power pin is designed specifically for use with the new Bernard® AccuLock S consumable system to optimize performance. Load and Lock for Better Productivity Learn more about AccuLock S consumables.
August 8, 2019 Tregaskiss is proud to announce that we have launched the following new conversion diffusers that receive TOUGH LOCK® contact tips, including HDP: Fronius® TPS 400i Lincoln® Magnum Pro® (Slip-On) Lincoln Magnum Pro (Thread-On) Learn more about TOUGH LOCK consumables.
June 18, 2019 To continue delivering sustainable value to our customers, we regularly assess our product offering to ensure focus on customer needs and opportunities to innovate our product portfolio. Accordingly, this is a notification that we are discontinuing Tregaskiss® SURESTART™ contact tips, due to low demand. Effective immediately: All SURESTART contact tips have been discontinued and no longer available for sale. Visit the TOUGH LOCK consumables page for more information.
January 25, 2019 To continue delivering sustainable value to our customers, we regularly assess our product offering to ensure focus on customer needs and opportunities to innovate our product portfolio. Accordingly, due to low demand, select Tregaskiss® nozzles will be discontinued. Effective March 1, 2019, all nozzles listed in the chart below will be discontinued as inventory depletes, and effective March 30, 2019, these nozzles will no longer be available for sale. Click here to download the above list in PDF format.
November 1, 2018 Bernard is proud to introduce new AccuLock™ S consumables, a system designed to address liner trim length errors and erratic wire feeding. Important Note: Most components of the AccuLock S consumables family are currently available. The complete offering will be coming soon. The AccuLock S liner is locked and concentrically aligned to both the contact tip and the power pin without the use of fasteners, which provides a flawless wire-feed path that guarantees smooth, uninterrupted delivery of the wire to the weld puddle. Plus, the liner replacement process has been error-proofed so you can trim your liner accurately and easily every time, with no measuring. The AccuLock S consumables system requires all AccuLock components: contact tip, diffuser, nozzle, liner, neck insulator, power pin and power pin cap.
November 1, 2018 Customers may notice that some Bernard® parts and consumables are arriving in different bags. We transitioned to a newly designed Bernard branded white bag design. In addition to changing the artwork layout and color of the bags, the overall usability has also been improved. These new white bags offer a clear window on the printed side of the bag to make visual product identification easier. To increase the hanging capacity of the bags, we’ve added a second hanging hole on our larger bags and a new double-sealed header on all bag sizes. The sombrero shaped hanging holes provide compatibility with a wider variety of hook sizes and shapes.
November 1, 2018 Customers may notice that some Tregaskiss® parts and consumables are arriving in different bags. We transitioned from a black bag design to a white bag design. This new white bag design has a clear window on the back side of the bag to help make visual product identification easier, and the durability and hanging holes remain the same as our previous black bag packaging.
February 3, 2017 Tregaskiss now recommends trimming all rear-loading conventional and front-loading QUICK LOAD® liners that are 6-feet in length and shorter with a 1/2-inch stick out. This new trim length provides performance improvements for the liner and cable, and for wire feeding overall. It also helps to reduce some strain on both the liner and the cable while still maintaining a proper liner seat in both the retaining head and the power pin. Effective late February, all bagged 6-foot Tregaskiss conventional and QUICK LOAD liners will include a new 1/2-inch blue liner gauge along with a technical insert outlining these updated trimming instructions. The outside of each bag will also be marked with a sticker indicating a change to liner trim length.
January 16, 2015 Tregaskiss has improved the crimp on our heavy duty (HD) nozzle offering. The profile on the crimping dies that form the ring crimp has been narrowed from a pad length of 0.450″ to a pad length of 0.390″ (see image below). This change significantly improves the quality of the crimp since it allows for enhanced integrity of the nozzle insulator. Click here to download the TOUGH LOCK® consumables spec sheet in PDF format for more detailed nozzle information.
PACKAGING CHANGE – Changes to Tregaskiss and Bernard Nozzle Bag Packaging
PACKAGING CHANGE –
Changes to Tregaskiss and Bernard Nozzle Bag Packaging
Current Bag Sizes and Styles:
New Bag Size and Style:
Transition Timeline
NEW PRODUCT – AccuLock R Consumables
NEW PRODUCT – AccuLock R Consumables
Series Components:
PRODUCT CHANGE – AccuLock S Power Pins for Miller Equipment
PRODUCT CHANGE –
New AccuLock S Power Pins for Miller Equipment
If your power pin has a large ID, please contact Customer Service to get the new AccuLock S Power Pin.
NEW (Shown Right) AccuLock S Power Pin Design
Torque to 10 ft-lbs / 120 in-lbs (13.5 Nm)Affected Part Numbers
2200137 Has been replaced by 2200206 and 2200207 in the AccuLock S consumables system as noted directly following 2200206 Replaces 2200137 for wire sizes 0.023″ (0.6 mm) – 5/64″ (2.0 mm) 2200207 Replaces 2200137 for wire sizes 3/32″ (2.4 mm) – 1/8″ (3.2 mm)
AccuLock S Consumables
NEW PRODUCT – Conversion Diffusers for TOUGH LOCK Contact Tips
NEW PRODUCT —
Conversion Diffusers for TOUGH LOCK Contact TipsConversion Diffuser
Description
DISCONTINUED PRODUCT – SURESTART Contact Tips
DISCONTINUED PRODUCTS – Tregaskiss SURESTART Contact Tips
Affected Part Number TOUGH LOCK® Direct Replacement 403-22-30 403-20-30-25 403-22-35 403-20-35-25 403-22-1.0 403-20-1.0-25 403-22-45 403-20-45-25 403-22-364 403-20-364-25 403-22-52 403-20-52-25 403-23-30 403-21-30-25
DISCONTINUED PRODUCT – Select Nozzles
DISCONTINUED PRODUCTS –
Select Tregaskiss NozzlesPart Number Description Substitution Notes Reamer Change 401-11-62 Nozzle, TIGHT RADIUS™, 5/8″ bore, 1/8″ recess — TCP change – Please contact Customer Service at 1.855.MIGWELD (644.9353) Yes 401-12-50 Nozzle, TIGHT RADIUS, 1/2″ bore, flush — TCP change – Please contact Customer Service at 1.855.MIGWELD (644.9353) Yes 401-13-62 Nozzle, TIGHT RADIUS, 5/8″ bore, 1/8″ stick out — TCP change – Please contact Customer Service at 1.855-MIGWELD (644.9353) Yes 401-19-62 Nozzle, 5/8″ bore, 1/4″ recess, brass 401-14-62 401-14-62 is 1/8″ recess, copper No 401-21 Nozzle, Flux-Core, 1/4″ recess — Discontinued – No replacement No 401-41-75 Nozzle, 3/4″ bore, 1/8″ recess 401-7-75 or 401-14-62 Move to slip-on 401-7-75 with new 404-32 retaining head (v-block change); or Move to 5/8″ bore (copper) 401-14-62 (no retaining head, but cutter change) Yes
(401-7-75: v-block;
401-14-62: RCT-01)401-43-50 Nozzle, 1/2 bore, 1/4″ recess 401-47-51 401-47-51 is 1/8″ recess, and different profile No 401-44-501 Nozzle, 1/2″ bore, 1/4″ stick out 401-44-50 401-44-50 is bottleneck style, not tapered No 401-45-38 Nozzle, 3/8″ bore, flush, old thread 401-4-38 Must use 404-52 or 404-53 retaining head No
(no 3/8 cutter)401-45-50 Nozzle, 1/2″ bore, 1/8″ recess, old thread 401-47-51 Must use 404-52 or 404-53 retaining head No 401-45-62 Nozzle, 5/8″ bore, 1/8″ recess, old thread 401-43-62 Must use 404-52 or 404-53 retaining head No 401-46-38 Nozzle, 3/8″ bore, 1/8″ recess, old thread 401-42-38 Must use 404-52 or 404-53 retaining head No 401-46-62 Nozzle, 5/8″ bore, 1/4″ recess, old thread 401-43-62 401-46-62 is 1/8″ recess; Must use 404-52 or 404-53 retaining head No 401-47-50 Nozzle, 1/2″ bore, 1/8″ recess, old thread 401-47-51 Must use 404-52 or 404-53 retaining head No 401-52-62 Nozzle, 5/8″ bore, 1/4″ recess 401-14-62 401-14-62 is 1/8″ recess No 401-54-50 Nozzle, TOUGH ACCESS™, 1/8″ recess 401-55-50 401-55-50 is flush No 401-55-62 Nozzle, TOUGH ACCESS, flush 401-54-62 or 401-56-62 401-54-62 is 1/8″ recess; 401-56-62 is 1/8″ stick out No 401-68-62 Nozzle, 5/8″ bore, flush, copper 401-51-62 Copper to brass No 401-92-62 Nozzle, 5/8″ bore, 1/4″ recess, brass 401-91-62 401-91-62 is 1/8″ recess No 401-9-75 Nozzle, 3/4″ bore, 1/2″ recess 401-5-75 401-5-75 is 1/4″ recess No 451-4-38 Nozzle, 3/8″ bore, 3/16″ recess 451-6-50 451-6-50 is 1/2″ bore No 451-45-50 Nozzle, High Access, water-cooled (semi-auto) 451-6-50 451-6-50 is tapered style, not bottleneck No 451-5-75 Nozzle, 3/4″ bore, 1/4″ recess, water-cooled (semi-auto) 451-5-62 451-5-62 is 5/8″ bore No 451-81-62 Nozzle, 5/8″ bore, 1/8″ stick out, water-cooled (semi-auto) 451-61-62 451-61-62 is flush No 451-87-62 Nozzle, 5/8″ bore, 3/16″ stick out, water-cooled (semi-auto) 451-61-62 451-61-62 is flush No
NEW PRODUCT – AccuLock S Consumables
NEW PRODUCT – AccuLock S Consumables
Key features of Bernard AccuLock S Consumables
PACKAGING CHANGE – Changes to Bernard Bag Packaging
PACKAGING CHANGE — Changes to Bernard Bag Packaging
Old Bernard Bags
New Bernard Bags
PACKAGING CHANGE – Changes to Tregaskiss Bag Packaging
PACKAGING CHANGES —
Changes to Tregaskiss Bag PackagingOld Tregaskiss Bags
New Tregaskiss Bags
PRODUCT UPDATE – New Liner Trim Length for Liners 6-Feet Long and Shorter
PRODUCT UPDATE –
New Liner Trim Length for Liners 6-Feet Long and Shorter
NOTE: Liners longer than 6-foot in length should still continue to be trimmed with a 3/4-inch stick out. No change to liner gauges or trim instructions for conventional or QUICK LOAD liners longer than 6-feet is recommended.PRODUCT IMPROVEMENT – Changes to Heavy Duty (HD) Nozzle Crimping
PRODUCT IMPROVEMENT –
Heavy Duty (HD) Nozzle Crimping
Affected Part Numbers
