• Tregaskiss MIG Welding Products
  • Tregaskiss MIG Welding Products
  • Tregaskiss MIG Welding Products
  • Tregaskiss MIG Welding Products
  • Tregaskiss MIG Welding Products

TOUGH GUN™ TT3 Reamer

More Reliable and it is Faster and Easier to Maintain Than Ever Before!

Introducing the next evolution of the TOUGH GUN™ Reamer from Tregaskiss. Improvements to the frame, wiring harness, setup switches and check valve make this new reamer more reliable and it is faster and easier to maintain than ever before!

The TOUGH GUN TT3 Reamer is TOUGH on spatter and operates reliably in even the harshest welding environments. Automating spatter removal will help to extend the life of your robotic MIG guns and consumables, benefitting both your bottom line and your production uptime and throughput.  

 

Download PDFSpec Sheet: English  |  Español 

Features and Benefits

What's New?

  • Terminal strip has been replaced with new wiring harness which provides increased reliability and takes up less space inside the reamer, making it easier to service and replace
  • New easy access setup switches are durable, waterproof, and fully protected from the elements without requiring the use of external flap protection
  • Check valve has been upgraded to a more robust and durable design
  • New wiring harness, setup switches and check valve are all common across both the TOUGH GUN TT3 and TT3E Reamer platforms

Safe and Accurate Setup

  • External setup switches allow independent operation of the sprayer, clamp and spindle during manual setup
  • Cutter blade lifts into position but does not spin when activated by the spindle setup switch

Ease of Maintenance

  • All wiring connections are built into the new wiring harness, reducing the risk of wiring errors during maintenance
  • Improved wire labeling for easy identification

Dependable Performance

Durability

  • 3/4 Horsepower lubricated air motor with gear reducer provides the high torque required for spatter removal at the lower speed needed to protect the spindle and cutter blade from excessive wear
  • No damage will occur to the air motor if stalling occurs
  • Operates in any position

Repeatability

  • Spindle has rotating rod accuracy of 0.001" - 0.004" at its extended position for cutting repeatability and optimized spatter removal
  • Fixed motor, clamp and v-block provide cutting accuracy and repeatability – No manual adjustments to nozzle clamps, cutter height, or motor height are required

Increased Reliability

  • Sprayer reservoir is located on the opposite side of the unit as an additional safeguard against overfilling / leakage onto internal electronics
  • All pneumatic valves are internally mounted
  • External setup switches are protected and seals protect points of entry

We've also made improvements to our Tregaskiss Cutter Blades! Enhanced performance and durability. Competitive new pricing. Better all the way around

Specifications

  • Rated voltage: 24 VDC
  • Operating voltage: ±10% of rated voltage
  • Power consumption: max. wattage in operation 5.3 W
  • Air requirements: 80 to 100 psi (5.0 to 7.0 bar) at 16 CFM (7.5 L/s)
  • Air motor (at min. air requirement): stall torque at 80 psi (5.5 bar) = 83 in.-lbs. (9.4 Nm)
  • Weight: ≃ 50 lbs. (23 kg.)*
  • Product dimensions (L x W x H): 13.5" x 11.25" x 21.0" (343 mm x 286 mm x 534 mm)*

Optional Features

Compatibility

*The optional features are sold separately or added as options when ordering, and can change the weight and physical dimensions of the product.

Technical Documentation

  • Download the OM-TT3 TOUGH GUN TT3 Reamer Owner's Manual  English  |  Español

IMPORTANT NOTE: Flash is required to utilize our online configurators. Click here to install Puffin Free Web Browser on your mobile device.

Configure your TOUGH GUN™ TT3 Reamer Robotic Nozzle Cleaning Station online

Configure your TOUGH GUN TT3 Reamer

Customize your TOUGH GUN TT3 Reamer and find the part number you need, get a parts list breakdown for the unit you build, and access its technical documentation using our convenient online configurator. You will even have the option to request a quote or contact us for more information.

Lubricator

This dedicated motor lubricator maximizes performance and protects your TOUGH GUN™ Reamer investment by extending the life of the motor, and is highly recommended for use in damp and moisture rich environments. Factory set for optimal pneumatic oil lubrication, the lubricator is available as an option when configuring your new unit* or is retrofittable to your existing TOUGH GUN TT3 Reamer.


*Ordering your new TOUGH GUN Reamer with the factory-installed lubricator option increases your warranty from 1 to 2 years, or increase your warranty to 3 years with the factory-installed lubricator option plus exclusive use of TOUGH GARD™ Anti-Spatter Liquid.

 

Lubricator

   

Filter / Regulator

The Filter / Regulator unit from Tregaskiss is another recommended accessory that helps extend the life of your TOUGH GUN Reamer. The filter cleans the air supply to the reamer and restricts debris from reaching the motor, keeping it uncontaminated and ensuring maximium performance and longer life, while the regulator works to ensure optimal air pressure is achieved at the unit.

Filter/Regulator

   

Spray Containment

The innovative Spray Containment unit from Tregaskiss helps prevent air contamination by catching anti-spatter overspray in its sealed basin, improving the air quality of the working environment and maintaining the cleanliness of the weld cell. Click here to learn more.

Spray Containment
   

TOUGH GUN Wire Cutter

The TOUGH GUN Wire Cutter removes the ball-end of the welding wire to provide smooth arc starts and consistent wire stick-out. The TOUGH GUN Wire Cutter easily cuts a variety of wire types from stainless steel to aluminum to flux-core in wire sizes up to 1/16". Click here for more information.

 

TOUGH GUN Wire Cutter

   

Nozzle Detection

Nozzle Detection for the TOUGH GUN TT3 Reamer uses a proximity sensor mounted on the side of the reamer that can be used independently of the ream cycle. The robot positions the front end of the MIG gun close to the sensor to detect the presence of the nozzle. If the nozzle is present, a signal is then sent back to the robot controller or PLC. Learn more about the nozzle detection system.

Nozzle Detection
   

Tregaskiss Cutter Blades

Improved performance. Competitive new pricing.

Tregaskiss is pleased to announce improvements to the design of our cutter blades. These new cutter blades are engineered from harder, stronger material for enhanced performance and durability, making them more resistant against breaking, snapping, chipping or cracking. Click here to find out more.

Tregaskiss Cutter Blades

   

Tregaskiss V-Blocks

Compatible with Tregaskiss™ and most competitive consumables, these four-sided v-blocks ensure your cutter is concentric with your consumables and your nozzle bore to guarantee the most effective ream. Choose from five available v-block options when configuring your new TOUGH GUN TT3 Reamer.

Tregaskiss V-Blocks
   

TOUGH GUN™ Reamer Stand

Custom Height. Quick Installation. Easy on the budget.

Tregaskiss provides a simple fixed height durable stand for all TOUGH GUN TT3 Reamer models. Each TOUGH GUN Reamer Stand can be ordered to a custom height between 18- and 45-inches. Click here to learn more.

TOUGH GUN Reamer Stand

   

TOUGH GARD™ Anti-Spatter Liquid

TOUGH GARD Anti-Spatter Liquid was developed to address the performance requirements of metal fabricators. TOUGH GARD Anti-Spatter Liquid won't harm machinery, it cleans up easily with no residue, it's safe to use and it's safe for the environment. Helping prevent spatter adhesion and extending the life of consumables, TOUGH GARD Anti-Spatter Liquid reduces downtime thus lowering operating and maintenance costs. Click here to learn more.

TOUGH GARD Anti-Spatter liquid

   

TOUGH GARD Multi-Feed System

The TOUGH GARD Multi-Feed System for anti-spatter solution can connect up to ten TOUGH GUN TT3 Reamer stations. This system eliminates the need to refill anti-spatter reservoirs on a frequent basis, resulting in lower operating costs, reduced downtime and increased safety. Click here for more information.

TOUGH GARD Multi-Feed System

Back to Top

 Product Literature

Videos and Animations

  •  Introducing the New TOUGH GUN TT3 Reamer from Tregaskiss  MP4  |  WMV

How-To Guides and Videos

Articles

Additional Resources

Tech Connection Product News