Tregaskiss™ Power Pins

Tregaskiss™ Power Pins provide a direct connection for wire, electrical current and gas flow between various feeder models and MIG welding guns. Power pins thread in easily to the rear MIG gun handle block. Tightening the power pin with a wrench is recommended to ensure a tight connection.

 

Download PDFSpec Sheet: English

Power Pins for Air-Cooled and Water-Cooled MIG Guns
 

+Click on an image below to enlarge it

214 214-12 214-7 214-1 214-14 214-40 214-30 425-10E 214-41 214-39

 

Power Pins for Air-Cooled MIG Guns

For Airco® Feeders

425 

for models: Auto-Pack 130, Dip-Pack 200 (New), Dipstick 160 (New), System, Universal, MIGhty 1, Med20, Med20 Synergic, Med40, Med40 Synergic

 

 

For Century® Feeders

425

for models: All Star, Solar 2-125 (Old), Solar165 117-003

214-5

for models: Century (Powcon® feeder)

 

 

For Cloos® Feeders

214-42

for models: Euro style

 

 

For ESAB® Feeders

425

for models: Med30, MIG 2E, MIG 4HD, MIG 4HD Dual, Mobile Master, ESAB MIG C420

414-12    

for models: Non-Euro

214-4

for models: feeders with "MT"-style Quick Connect Block

 

 

For Fronius® Feeders

214-41

for models: ThruArm™ Style: VR 1500 M, VR 1500 PAP

 

 

For Hansen® Feeders

425

for models: MIG 160, 1000, 2000

 

 

For Hobart® Feeders

214

for models: Beta-MIG (New Style), Beta-MIG 250, 251, Dual Feeder, Digital 2000, Dual Digital, Porta-Feed 17, Ultra-Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC

214-4

for models: Handler 120, 150, Beta-MIG 170, Beta-MIG 200,  Porta-Wire CC/CV, 2200 Feeder, 2210 Feeder

214-1

for models: Hobart Beta-MIG 261 (Part #903533), Olympic 22-P, Olympic VS, Ironman 275

214-12

for models: 200, 2400 (large pin)

214-29

for models: Handler 135, Handler 175

 

 

For Lincoln® Feeders

214

for models: Wirematic 250, 255 (NOTE: Interference with standard handle gun shroud), SP-85, SP-86, SP-100, SP-100T, SP-125Plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak 10, MIG Pak 55, Weld Pak 100, Power-MIG 255, Power-MIG 200, 250, 300, 350 MC, Power-Feed 10M, Power-Feed 25M, DH-10, LN-10 (New Style), LN-25 PRO, STT-10 — NOTE: These feeders can also have bushings for Tweco® #5, Lincoln and Miller®, Power-MIG 200, Power-MIG 250

214-7

for models: LN4, LN5, LN6, LN7, LN8, LN9, LN22, LN25, LN742, Suitcase, IdealARC SP-150, NA5R, Power-Feed 10 (Robotic), Power Wave 450/455, Synergic 7

214-2

for models: LN7, LN8, LN9, LN22, LN25, Suitcase, LN742, Synergic 7

425

for models: PowerWave 450, Syndergic 7

214-40

for models: PowerWave 4R Series

 

 

For Linde® / L-Tec® Feeders

425

for models: MIGMaster 250, 4HD, MIG2E

 

 

For Miller® Feeders

214-1

(Robotic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New),  MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115

214-6-116    

(Semi-Automatic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New),  MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115

214-29

for models: Firefly 130

 

 

For OTC Daihen® Feeders

214-39

for models: CM741, CMRE741, AF4001, New D Series

 

 

For OXO™ Feeders

427

for models: PS-60Q, AVC-30Q

 

 

For Panasonic® Feeders

214-13

for models: Panasonic, Gun Slinger 260

214-14

for all models

214-30

for all models (push-to-connect gas fitting)

 

 

For Powcon® Feeders

425

for models: PD10, 22 Series, 60 Series, PDVS11

214

for models: PD1, PD2

 

 

For Snap-On® Feeders

214

for models: FM140A

 
Back to Top

Power Pins for Water-Cooled MIG Guns

For Hobart® Feeders

214W

for models: Beta-MIG (New Style), Beta-MIG 250, 251, Dual Feeder, Digital 2000, Dual Digital, Porta-Feed 17, Ultra-Feed 1000, 2000, 2400, Handler, Oscawa, Hefty CV/CC

214-1W

for models: Hobart Beta-MIG 261 (Part #903533), Olympic 22-P, Olympic VS, Ironman 275

214-12W    

for models: 200, 2400 (large pin)

 

 

For Lincoln® Feeders

214W

for models: Wirematic 250, 255 (NOTE: Interference with standard handle gun shroud), SP-85, SP-86, SP-100, SP-100T, SP-125Plus, SP-130, SP-130T, SP-150, SP-170, SP-200, SP-250, IdealARC SP-255, MIG Pak 10, MIG Pak 55, Weld Pak 100, Power-MIG 255, Power-MIG 200, 250, 300, 350 MC, Power-Feed 10M, Power-Feed 25M, DH-10, LN-10 (New Style), LN-25 PRO, STT-10 — NOTE: These feeders can also have bushings for Tweco® #5, Lincoln and Miller®, Power-MIG 200, Power-MIG 250

214-7W

for models: LN4, LN5, LN6, LN7, LN8, LN9, LN22, LN25, LN742, Suitcase, IdealARC SP-150, NA5R, Power-Feed 10 (Robotic), Power Wave 450/455, Synergic 7

214-40W

for models: PowerWave 4R Series

 

 

For Miller® Feeders

214-1W

(Robotic) for models: Cricket, Intellimatic, Sidekick, D-51A, Millermatic 130, 150, 200, 250, 250MP, 300, MM-35 (New),  MM90, New Automatic 1, PortaMIG, S32P, S42GL, S52A, S54A, Swing Arc Dual Swing, Swicng Arc Single, S32S, 52D, 54D, 52E, 54E, Shop Master 300, 22 Series, 60 Series, 70 Series, Millermatic 130XP, Challenger 172, 185, Vintage, 250X, Suitcase 8VS, 12VS, R115

 

 

For Panasonic® Feeders

214-30W

for all models (push-to-connect gas fitting)

 

 

For Powcon® Feeders

214W

for models: PD1, PD2

 

 

For Snap-On® Feeders

214W

for models: FM140A

 
Back to Top

Product Literature

Articles

Is short liner length an issue?

Tech Connection Product News