QUICK LOAD Liners for MIG Welding Guns


Save time and money by loading your liners from the front!
Front-Loading QUICK LOAD Liner from Tregaskiss

Innovative QUICK LOAD™ Liners install at the FRONT of the MIG gun!

 

QUICK LOAD™ Liners are available for Tregaskiss™ TOUGH GUN™ Robotic and Automatic MIG Welding Guns in lengths of up to 15 feet.

The QUICK LOAD Liner System is also available for Bernard™ Best of the Best Platform MIG Guns in lengths of up to 25 feet. 

 SAVE EVEN MORE with an UPGRADE to the new QUICK LOAD Liner AutoLength System! 

Features & Benefits

  • Requires less than half the time and effort to replace (compared to conventional liners)
  • Two-piece system with retainer installed inside the power pin on first use
  • Liner portion feeds from the front of the MIG gun
  • No need to cut and waste wire!
  • Avoid climbing over robotic tooling or transfer systems to remove the torch from the wire feeder
  • Change the liner from a safe zone in the robotic work cell
  • No need to climb up to change liners in semi-automatic MIG guns connected to boom mounted feeders


Converting from Conventional Liners to QUICK LOAD Liners couldn't be easier!

QUICK LOAD Liners include wire sizes from 0.023" to 3/32". Find a complete list of QUICK LOAD Liners below, along with their equivalent Tregaskiss Conventional Liner for easy conversion.  

WIRE SIZE

QUICK LOAD
LINER

REPLACES
CONVENTIONAL
LINER

DESCRIPTION

0.023"

415-23-15Q

415-23-15

High Carbon Steel – Round Wound

0.030"

415-30-6Q

415-30-6

High Carbon Steel – Round Wound

0.030"

415-30-15Q

415-30-15

High Carbon Steel – Round Wound

0.035" - 0.045"

415-35-6Q

415-35-6

High Carbon Steel – Round Wound

0.035" - 0.045"

415-35-10Q

415-35-10

High Carbon Steel – Round Wound

0.035" - 0.045"

415-35-15Q

415-35-15

High Carbon Steel – Round Wound

0.035" - 0.045"

415-35-25Q

415-35-25

High Carbon Steel – Round Wound

0.045" - 1/16"

415-116-6Q

415-116-6

High Carbon Steel – Round Wound

0.045" - 1/16"

415-116-10Q

415-116-10

High Carbon Steel – Round Wound

0.045" - 1/16"

415-116-15Q

415-116-15

High Carbon Steel – Round Wound

0.045" - 1/16"

415-116-25Q

415-116-25

High Carbon Steel – Round Wound

1/16" - 5/64"

415-564-6Q

415-564-6

High Carbon Steel – Round Wound

1/16" - 5/64"

415-564-15Q

415-564-15

High Carbon Steel – Round Wound

1/16" - 5/64"

415-564-25Q

415-564-25

High Carbon Steel – Round Wound

0.078" - 3/32"

415-332-6Q

415-332-6

High Carbon Steel – Flat Wound

0.078" - 3/32"

415-332-15Q

415-332-15

High Carbon Steel – Flat Wound

0.078" - 3/32"

415-332-25Q

415-332-25

High Carbon Steel – Flat Wound

LINER RETAINERS – REQUIRED FOR INITIAL INSTALLATION ONLY (SOLD SEPARATELY)

0.078" - 3/32"

415-24

N/A

QUICK LOAD Liner Retainer*

0.030" - 5/64"

415-26

N/A

QUICK LOAD Liner Retainer*

0.030" - 5/64"

415-37

N/A

QUICK LOAD Liner Retainer**

*Compatible with Tregaskiss TOUGH GUN Robotic and Automatic MIG Guns and Bernard™ Best of the Best Platform Semi-Automatic MIG Guns

**Compatible with most Tweco® MIG guns

Back to Top