NEW TECHNOLOGY!

QUICK LOAD Liner AutoLength System from TregaskissQUICK LOAD™ Liner AutoLength™ System


The QUICK LOAD™ Liner AutoLength™ System from Tregaskiss is designed specifically to minimize downtime, wire feeding and quality issues commonly associated with the liner being cut to an incorrect length.

Short liners are a common root cause of poor wire feeding. Further, a short liner does not have a chance of properly seating in the retaining head — often resulting in "bird-nesting" of the welding wire or premature contact tip failure and wear.

Wire feeding challenges reduce efficiency of the welding process and cause undesirable (and expensive) downtime. A system upgrade to this new innovative product can help improve welding efficiency and reduce costly downtime.  

How It Works

Heard the buzz about our revolutionary QUICK LOAD Liner AutoLength System?

>> Español  |  >> Français

  • Housed inside the power pin, this spring-loaded module applies constant forward pressure on the liner, keeping it seated properly in the retaining head
  • Allows for up to one-inch (2.54 cm) forgiveness if the liner is too short
  • Accommodates liner movement during welding
  • NEW!! Check out our new 3D animationMP4  |  WMV

How It Increases Productivity

  • Reduces issues caused by the liner being cut to an incorrect length
  • Decreases burn-backs caused by misalignment between the liner and the contact tip
  • Improves wire feedability by enhancing wire alignment with the contact tip

Designed Specifically for use with QUICK LOAD™ Liners

QUICK LOAD™ Liner AutoLength™ System Part Numbers

AutoLength™ Pins

For Miller® Feeders

214-81

for 0.035" - 0.045" wire; interchangeable with 214-1 power pin

214-91

for 0.052" - 1/16" wire; interchangeable with 214-1 power pin

   

For Tweco® #4 Feeders

214-80

for 0.035" - 0.045" wire; interchangeable with 214 power pin

214-90

for 0.052" - 1/16" wire; interchangeable with 214 power pin

   

For Tweco #5 Feeders

214-812

for 0.035" - 0.045" wire; interchangeable with 214-12 power pin

214-912

for 0.052" - 1/16" wire; interchangeable with 214-12 power pin

   

For Lincoln® Feeders

214-87

for 0.035" - 0.045" wire; interchangeable with 214-7 power pin

214-97

for 0.052" - 1/16" wire; interchangeable with 214-7 power pin

214-818

for 0.035" - 0.045" wire; interchangeable with 214-18 power pin

214-918

for 0.052" - 1/16" wire; interchangeable with 214-18 power pin

214-840

for 0.035" - 0.045" wire; interchangeable with 214-40 power pin

214-940

for 0.052" - 1/16" wire; interchangeable with 214-40 power pin

   

For Panasonic® Feeders

214-814

for 0.035" - 0.045" wire; interchangeable with 214-14 power pin

214-914

for 0.052" - 1/16" wire; interchangeable with 214-14 power pin

214-830

for 0.035" - 0.045" wire; interchangeable with 214-30 power pin

214-930

for 0.052" - 1/16" wire; interchangeable with 214-30 power pin

   

For Fronius® Feeders

214-817

for 0.035" - 0.045" wire; interchangeable with 214-17 power pin

214-917

for 0.052" - 1/16" wire; interchangeable with 214-17 power pin

214-841

for 0.035" - 0.045" wire; interchangeable with 214-41 power pin

214-941

for 0.052" - 1/16" wire; interchangeable with 214-41 power pin

   

For Euro Feeders

425-820E

for 0.035" - 0.045" wire; interchangeable with 425-20E power pin

425-920E

for 0.052" - 1/16" wire; interchangeable with 425-20E power pin

   

For L-Tec® Feeders

214-84

for 0.035" - 0.045" wire; interchangeable with 214-4 power pin

214-94

for 0.052" - 1/16" wire; interchangeable with 214-4 power pin

   

For OTC Daihen® Feeders

214-839

for 0.035" - 0.045" wire; interchangeable with 214-39 power pin

214-939

for 0.052" - 1/16" wire; interchangeable with 214-39 power pin

Back to Top

AutoLength Kits*

For Miller® Feeders

214-81R

for 0.035" - 0.045" wire; kit includes 214-81 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-91R

for 0.052" - 1/16" wire; kit includes 214-91 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

   

For Tweco® #4 Feeders

214-80R

for 0.035" - 0.045" wire; kit includes 214-80 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-90R

for 0.052" - 1/16" wire; kit includes 214-90 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

   

For Tweco #5 Feeders

214-812R

for 0.035" - 0.045" wire; kit includes 214-812 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-912R

for 0.052" - 1/16" wire; kit includes 214-912 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

   

For Lincoln® Feeders

214-87R

for 0.035" - 0.045" wire; kit includes 214-87 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-97R

for 0.052" - 1/16" wire; kit includes 214-97 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

214-818R

for 0.035" - 0.045" wire; kit includes 214-818 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-918R

for 0.052" - 1/16" wire; kit includes 214-918 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

214-840R

for 0.035" - 0.045" wire; kit includes 214-840 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-940R

for 0.052" - 1/16" wire; kit includes 214-940 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

   

For Panasonic® Feeders

214-814R

for 0.035" - 0.045" wire; kit includes 214-814 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-914R

for 0.052" - 1/16" wire; kit includes 214-914 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

214-830R

for 0.035" - 0.045" wire; kit includes 214-830 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-930R

for 0.052" - 1/16" wire; kit includes 214-930 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

   

For Fronius® Feeders

214-817R

for 0.035" - 0.045" wire; kit includes 214-817 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-917R

for 0.052" - 1/16" wire; kit includes 214-917 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

214-841R

for 0.035" - 0.045" wire; kit includes 214-841 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-941R

for 0.052" - 1/16" wire; kit includes 214-941 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

   

For L-Tec® Feeders

214-84R

for 0.035" - 0.045" wire; kit includes 214-84 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-94R

for 0.052" - 1/16" wire; kit includes 214-94 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

   

For OTC Daihen® Feeders

214-839R

for 0.035" - 0.045" wire; kit includes 214-839 AutoLength Pin and 415-35-10Q QUICK LOAD Liner

214-939R

for 0.052" - 1/16" wire; kit includes 214-939 AutoLength Pin and 415-116-10Q QUICK LOAD Liner

 

*The AutoLength Kit is a limited time promotional offering that includes one AutoLength Pin and one bonus QUICK LOAD Liner.

Back to Top

Additional wire sizes may be available. Please contact Customer Service to inquire.

Product Literature

Technical Documentation

Videos and Animations

How-To Guides and Videos

How-To Guides

How-To Videos

  • How to replace a QUICK LOAD Liner in a gun equipped with an AutoLength Pin  MP4  |  WMV

Tech Connection Product News

Articles