• Select Your Gun Mount
  • Select Your Nozzle
  • Select Your Gooseneck
  • Select Your Contact Tip
  • Select Your Wire Size
  • Select Your Power Pin
  • ThruArm Series

    • TOUGH GUN ThruArm Series MIG Guns for OTC RobotsTOUGH GUN ThruArm Series for
    OTC Arc Welding Robots

    Learn More

    Learn more about our newest air-cooled robotic MIG gun:

    Configure a Part Number

    The following configuration guide is designed to ensure that you receive the correct ThruArm Series MIG Gun for your particular robot and welding application. 

    The part number for a ThruArm Series MIG Gun is made up of a series of 10 numbers and letters as seen in the chart below.  You may wish to print this page to fill in digits 5 through 10 as you progress through this configuration guide.

    If you have questions or require assistance with configuring your part number, please contact our Customer Service department via email or call 1-877-737-3111.
     

    STEP 1:  Select Your Robot Model   STEP 2:  Enter Your Configuration Options 
    Robot Model  
    1
    ThruArm Series

    		  
    2
    Robot
    Brand

    		  
    3
    Robot Model 1

    		  
    4
    Robot Model 2

    		    
    5
    Gun Mount & Option    		  
    6
    Nozzle


    		  
    7
    Goose neck

    		  
    8
    Contact Tip

    		  
    9
    Wire Size

    		  
    10
    Power Pin
    AX-V4
    		 T D 0 3  
    		         
    AX-V4L T D 2 2  
    		         

     
    1.  Enter "T" for ThruArm Series

    2.  Select Your Robot Brand - "D" for OTC / DAIHEN

    3. / 4.  Select Your Robot Model -
    "03" for AX-V4
    "22" for AX-V4L



    		 5.  Select Your Gun Mounting System

    6.  Select Your Nozzle

    7.  Select Your Gooseneck

    8.  Select Your Contact Tip

    9.  Select Your Wire Size

    10.  Select Your Power Pin