Ordering Information for the TOUGH GUN G2 Series

STEP A:  Build Your Gun Part Number

To build a part number for your TOUGH GUN G2 Series Robotic MIG Gun, please PRINT THIS PAGE and then refer to the reference charts for Steps 4 through 12 to make your selections.  Write the DIGIT for each of your selections in the following table on your print out to complete your part number.

1
Class
 2
Type
 3
Gen
   4
Amps
 5
Neck
 6
Option 1
 7
Option 2
 8
Cable
Length
 9
Nozzle
 10
Tip Type
 11
 Wire
Size		 12
Power
Pin
R A
 2                    
                         
 Robotic  Air-Cooled Generation
2		                    

 

1.    Select the Gun Class - enter "R" for Robotic

2.    Selec the Gun Type - enter "A" for Air-Cooled

3.    Select Your Gun Generation - enter "2" for Generation 2

4.    Select Your Amperage

5.    Select Your Gooseneck

6.    Select Your Option 1

7.    Select Your Option 2

8.    Select Your Cable Length

9.    Select Your Nozzle

10.  Select Your Contact Tip

11.  Select Your Wire Size

12.  Select Your Power Pin


STEP B:  Select your insulating disc
 

STEP C:  Select your mounting arm

 

BACK to TOUGH GUN G2 Series main page